中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/60801
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 42447604      線上人數 : 1284
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/60801


    題名: 大面積排列壓電奈米纖維應用於奈米發電機及自供電式形變感測器;Massively aligned piezoelectric nanofibers as nanogenerator and self-powered deformation sensor
    作者: 葉家成;Ye,Jia-Cheng
    貢獻者: 能源工程研究所
    關鍵詞: 近場電紡織技術;壓電材料;奈米纖維;奈米發電機
    日期: 2013-07-16
    上傳時間: 2013-08-22 12:03:22 (UTC+8)
    出版者: 國立中央大學
    摘要: 本論文利用近場電紡織技術(near-field electrospinning,NFES),研究壓電奈米纖維並且製作成奈米發電機(nanogenerator,NG),主要重點為(1)利用近場電紡織技術大面積排列壓電奈米纖維製造奈米發電機,(2)奈米發電機疊加輸出與訊號驗證,(3)奈米發電機作為自供電式形變感測器。以直寫(Direct-write)方式將壓電高分子材料聚偏氟乙烯(polyvinylidene fluoride,PVDF)利用NFES技術將奈米纖維(nanofibers,NFs)大面積排列在可撓性基底上製作成奈米發電機,並且進行一系列訊號量測與驗證。為了使NG輸出增加,我們改良電極設計成功使輸出提升,並將NG以疊加方式嘗試提高輸出,成功將電壓輸出提高到20V。另外,我們將NG固定於人體手指上運用手指關節移動使NG有訊號產生。最後,我們使用可撓性更好的材料當基底,成功製作出厚度僅200 μm的NG,由於可撓性佳的基底加上厚度薄,我們將NG固定在旗子上使NG可以隨旗子擺動利用風力轉換成電力作為自供電式形變感測器。
    This thesis mainly research fabrication of nanogenerator, piezoelectric technology and application in electrospinning. The focus of the study is (1) Massively parallel aligned nanofibers-based nanogenerator deposited via near-field electrospinning, (2) Superposition of nanogenerator and measurement, (3) A flexible, self-powered deformation sensor based on nanogenerator. we demonstrate a direct-write, in-situ poled polyvinylidene fluoride (PVDF) nanofiber arrays that could functions as a self-powered active deformation sensor. The fabricated hybrid structure of sensor/nanogenerator (NG) is realized via direct deposition of near-field electrospun nanofibers on Cu-foil electrode of thickness ~200 μm and fully encapsulated on a flexible substrate. Capable of integrating into fabric such as a waving flag due to high flexibility and excellent conformability, the nanofiber-based device can serve as an active deformation sensor under ambient wind-speed and the feasibility of efficiently convert the flutter motion into electricity are also demonstrated. This low-cost, simple structure, high sensitivity and good environment-friendly nanofibers is a very promising material/technology as practical energy harvesting devices and self-powered sensors and capable of scavenging very small wind power or mechanical induced vibration.
    顯示於類別:[能源工程研究所 ] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML716檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明