探討酸/鹼高分子質子交換膜在無水狀態之研究; Studies of Acid/Base Polymer for Anhydrous Proton Exchange Membrane

NCU Institutional Repository > 理學院 > 化學研究所 > 博碩士論文 > Item 987654321/6185

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/6185

題名:	探討酸/鹼高分子質子交換膜在無水狀態之研究;Studies of Acid/Base Polymer for Anhydrous Proton Exchange Membrane
作者:	彭元軍;Yuan-Chun Peng
貢獻者:	化學研究所
關鍵詞:	直接甲醇燃料電池;酸/鹼高分子複合物;質子交換膜;無水狀態;Acid/Base Polymer Complex;Proton Exchange Membrane (PEM);anhydrous;Direct methanol fuel cell (DMFC)
日期:	2006-07-10
上傳時間:	2009-09-22 10:15:04 (UTC+8)
出版者:	國立中央大學圖書館
摘要:	直接甲醇燃料電池（Direct Methanol Fuel Cell，DMFC）具備了數個符合未來替代能源需求的優勢，因此被認為是最具開發價值的燃料電池種類之一，其中，質子交換膜為整個燃料電池組中最重要的組件之一，質子交換膜的特性將影響燃料電池未來的應用。具有好的熱穩定性的薄膜可以擴大燃料電池工作的溫度範圍，隨著工作溫度的提高，燃料電池的效能也將大大地改善，但是，在高工作溫度下，無法藉著水分帶動質子導電，因此也需要不同以往的質子傳遞機制。本研究使用不同分子量的酸性高分子PAA（poly(acrylic acid)）和鹼性高分子P4VP（poly(4-vinylpyridine)）經過摻合後，利用酸、鹼官能基之間的作用力—氫鍵和離子鍵作用力，製備成酸/鹼高分子複合物質子交換膜，除了具有良好的熱穩定性外，也建構出新的質子傳遞通道，在新的通道內，酸、鹼官能基因吸引力而相互配對，少數未配對上質子的鹼官能基，可接受周圍傳遞過來的質子，並傳遞至周圍的「proton defect」，這類質子傳遞方式在通道內如同進行「zip-unzip」的行為，利用新的質子傳遞機制且同時具有熱穩性定，即可應用於高溫無水狀態下的燃料電池。 Direct Methanol Fuel Cells (DMFCs) possessing several advantage that tally with the alternative energy source demand in the future. And it is considered to one kind of the fuel cells which having the most developed values. Among them, the proton exchange membrane is one of the most important component in the whole fuel cell. The characteristics of the proton exchange membrane will influence the applications of the fuel cells in the future. If the membrane with good thermal stability, it can expand the operating temperature of the fuel cell. With the increasing of the operating temperature, the performance of the fuel cells will be improved greatly. However, it is unable to deliver the proton by water molecules under higher operating temperature, so need different proton transition mechanisms. This research uses the acidic polymer PAA (poly(acrylic acid)) of different molecular weight combined with the basic polymer P4VP (poly(4-vinylpyridine)) and P(4VPcoS). Then the proton exchange membranes were prepared by the hydrogen bonding and ionic bonding interaction between the acidic and basic polymers. Besides having good thermal stability, there is a new proton transition channel in the membranes. Since the interaction between the acid and base, the acidic and basic functional groups matched with each other. Other few basic polymer that not matched with proton could accept the proton transmitted over around, then deliver to proton defect nearby. This kind of proton transition mechanism like proceeding zip-unzip behavior. If the membrane has the new proton conductive mechanism and thermal stability, it could have the opportunity to apply in the fuel cells under high temperature and anhydrous conditions.
顯示於類別:	[化學研究所] 博碩士論文

文件中的檔案:

檔案	大小	格式	瀏覽次數

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing

資料載入中.....