| 摘要: | 研究期間：10308~10407;The purpose of this project is to develop a digital signal processor (DSP)-based fault tolerant control of six-phase permanent magnet synchronous motor (PMSM) drive system. This system is suitable for industrial applications such as mechanical tools, aerospace technology, vehicle technology, compressors, robotic arms, robots, electric vehicles and some specific applications. In the first year of this project, the six-phase PMSM is designed and the dynamic model of six-phase PMSM is analyzed and derived. Moreover, the DSP-based motor drive and control system is developed to actuate the six-phase PMSM. The six-phase PMSM drive system is highly nonlinear and is very sensitive to parameter variations and external disturbance. When the motor winding or the respective inverter is broken, the torque fluctuation will appear due to unbalanced current and the motor operates under non-smooth situation even results in much serious broken. Therefore, the stability and the fault tolerant control are the most important issues of the six-phase PMSM drive and control system. For this reason, in the second year of this project, a Takagi-Sugeno-Kang type fuzzy neural network with asymmetric membership function (ATSKFNN) controller is developed and the fault detection and operating decision method is designed to achieve fault tolerant control. Furthermore, an intelligent complementary sliding-mode controller (ICSMC), which combines complementary sliding-mode control and Takagi-Sugeno-Kang type fuzzy neural network with asymmetric membership function, are developed to improve the control performance and to achieve the requirements of stability of fault tolerant control of six-phase PMSM drive system in the last year of this project. A TMS320F28335 DSP made by Texas Instruments (TI) is the core of the proposed control system. Moreover, the proposed control algorithms are realized in the DSP using the “C” language. The DSP extension board reads the rotor position, motor speed and six-phase currents from the sensors using encoder interface circuit and analog to digital converters (ADCs). Furthermore, the resulted pulse width modulation (PWM) signals are sent to control the IGBT-based inverter and actuate the six-phase PMSM according to the fault detection and operating decision method and field-oriented control. Therefore, the DSP-based fault tolerant control of the six-phase PMSM drive system can be achieved. In addition, the DSP-based fault tolerant control of the six-phase PMSM drive system with guaranteed stability can be used as the prototype for commercial realization. |
