新型磁彈性磨料的研製及其應用於內孔精微拋光之研究;A Study on the Development and the Application on Inner Wall Polishing of Novel Magneto-Elastic Abrasives

NCU Institutional Repository > 工學院 > 機械工程學系 > 研究計畫 > Item 987654321/62149

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/62149

題名:	新型磁彈性磨料的研製及其應用於內孔精微拋光之研究;A Study on the Development and the Application on Inner Wall Polishing of Novel Magneto-Elastic Abrasives
作者:	顏炳華
貢獻者:	國立中央大學機械工程學系
關鍵詞:	機械工程
日期:	2014-03-11
上傳時間:	2014-03-11 15:20:43 (UTC+8)
出版者:	行政院國家科學委員會
摘要:	研究期間：10308~10407;With the trend toward manufacturing precision and complication on the compactness and the surface quality of products, the popularity of micro-polishing and electrical discharge machining turns higher, but at the same time, the removing of the cutting marks and burrs left out of complex surface as well as fine holes after polishing process becomes a must if the quality of the products is required. However, based on the literature reviewed, some constraints were yet overcome on the development of the flowing abrasive technology. Factoring the constraints into consideration, this study aimed to develop novel magneto-elastic abrasives and apply them to the spiral polishing mechanism, expecting to effectively remove the burrs and the metamorphic layer on the workpiece surface created in the polishing process, and thus avoiding the residual stress on it. Therefore, the surface roughness was improved and the purpose of precision polishing was achieved. The development of this new precision polishing technology is scheduled to be realized in three years, and the discussion will be generally divided into three aspects: 1. Discussing the influence the processing parameters have on spiral polishing mechanism in terms of Taguchi Method. 2. Combining the use of magnetic polymer particles and SiC abrasives in the inner bores polishing process. 3. Establishing magnetic assisted spiral polishing mechanism by means of novel magneto-elastic abrasives to improve the surface quality of inner bores. The results of the present study provided a low cost and effective polishing method for improving the surface quality of geometric workpieces in the hope of offering constructive suggestion to academic research, mechanical and production industry.
關聯:	財團法人國家實驗研究院科技政策研究與資訊中心
顯示於類別:	[機械工程學系] 研究計畫

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	317	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing

資料載入中.....