LED磊晶關鍵耗材研發;The R&D of LED Key Consumables

NCU Institutional Repository > 工學院 > 機械工程研究所 > 研究計畫 > Item 987654321/63240

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/63240

题名:	LED磊晶關鍵耗材研發;The R&D of LED Key Consumables
作者:	利定東;蕭述三;楊萬嶸;楊繼仁;胡智愷;胡立成;何國鴻;葉哲宏
贡献者:	國立中央大學機械工程研究所
关键词:	機械工程
日期:	2013-12-01
上传时间:	2014-03-17 14:24:27 (UTC+8)
出版者:	經濟部能源局
摘要:	研究期間：10207~10212;MOCVD is usually used in LED thin film deposition. But there is a common problem about the graphite suceptor because the MO source would etch it to make the susceptor crack. This proposal will solve the problem by using SiC susceptor. The research includes the simulation analysis of the reactor and susceptor: the high uniformity about the reactor flow field, the optimization of MO source usage, the influence about the relative distance in reactor, and the temperature distribution on susceptor. Besides, we use the SiC replacing the original graphite susceptor, and then use the RF coil heating the susceptor by eddy current. Next, we observe the temperature field to find a design which has the smallest thermal stress effect. Finally, we do experiments to verify that this design is reliable. In addition, we also cooperate with Chung-Shan Institute of Science to grow the SiC susceptor, install the susceptor into the reactor, and compare the experiment results with the simulations we did. By these researches, we will develop a SiC susceptor and will use in big-size in the future.
關聯:	財團法人國家實驗研究院科技政策研究與資訊中心
显示于类别:	[機械工程研究所] 研究計畫

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	583	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....