中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/63247
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 78728/78728 (100%)
造访人次 : 33562135      在线人数 : 634
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/63247


    题名: 以反應曲面實驗設計的方法探討超音波振動對下料加工的影響;An Investigation into the Effect of Ultrasonic Vibration Superimposed to the Die in Blanking Process Using the Surface Response Methodology Based on Design of Experiments
    作者: 葉維磬
    贡献者: 國立中央大學機械工程學系
    关键词: 機械工程
    日期: 2012-12-01
    上传时间: 2014-03-17 14:24:48 (UTC+8)
    出版者: 行政院國家科學委員會
    摘要: 研究期間:10108~10207;The application of ultrasonic vibrations superimposed on wire drawing, deep drawing and upsetting has been both theoretically and experimentally developed in the literature [3-7,9-10,12-15], but no attempts have ever developed by superimposing it to the die in blanking process experimentally. The only theoretical investigation into the effect of ultrasonic vibrations superimposed to the die in the blanking process was due to Yeh et al. [2], who reported that the edge quality of blanked product can be significantly improved. Therefore, the main objective of this proposal is to investigate experimentally the effect of ultrasonic vibrations superimposed on the quality of blanked product, including the development of appropriate mathematical model which can be used to determine a set of optimum parameters for the blanking process. One of the objective of the proposal, however, is to experimentally verify the validity of the result obtained using a finite element method in Yeh et al. [2]. To achieve the objective above mentioned, the surface response methodology based on design of experiments will be employed to plan all experimental alternatives. The blanking speed, the clearance between die and punch, and the feeding angle, all having three distinct levels, will be chosen as working parameter considered in the experimental alternatives. A set of blanking die with an ultrasonic vibration device will be developed in order to carry out the experiments. The experimental result obtained with and without ultrasonic vibrations superimposed will be compared and discussed other to investigate the effect of the ultrasonic vibration on the edge quality of blanked products. By doing so, it is expected that sufficient information on the quality of blanked products can be obtained from a number of experiment carried out as less as possible, and thus the objective of this proposal can be achieved very economically. This is also consistent with the goal generally required by industries.
    關聯: 財團法人國家實驗研究院科技政策研究與資訊中心
    显示于类别:[機械工程學系] 研究計畫

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML308检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明