中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/63272
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 66984/66984 (100%)
造訪人次 : 23030009      線上人數 : 395
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/63272


    題名: 新型磁彈性磨料的研製及其應用於內孔精微拋光之研究;A Study on the Development and the Application on Inner Wall Polishing of Novel Magneto-Elastic Abrasives
    作者: 顏炳華
    貢獻者: 國立中央大學機械工程學系
    關鍵詞: 機械工程
    日期: 2012-12-01
    上傳時間: 2014-03-17 14:25:40 (UTC+8)
    出版者: 行政院國家科學委員會
    摘要: 研究期間:10108~10207;With the trend toward manufacturing precision and complication on the compactness and the surface quality of products, the popularity of micro-polishing and electrical discharge machining turns higher, but at the same time, the removing of the cutting marks and burrs left out of complex surface as well as fine holes after polishing process becomes a must if the quality of the products is required. However, based on the literature reviewed, some constraints were yet overcome on the development of the flowing abrasive technology. Factoring the constraints into consideration, this study aimed to develop novel magneto-elastic abrasives and apply them to the spiral polishing mechanism, expecting to effectively remove the burrs and the metamorphic layer on the workpiece surface created in the polishing process, and thus avoiding the residual stress on it. Therefore, the surface roughness was improved and the purpose of precision polishing was achieved. The development of this new precision polishing technology is scheduled to be realized in three years, and the discussion will be generally divided into three aspects: 1. Discussing the influence the processing parameters have on spiral polishing mechanism in terms of Taguchi Method. 2. Combining the use of magnetic polymer particles and SiC abrasives in the inner bores polishing process. 3. Establishing magnetic assisted spiral polishing mechanism by means of novel magneto-elastic abrasives to improve the surface quality of inner bores. The results of the present study provided a low cost and effective polishing method for improving the surface quality of geometric workpieces in the hope of offering constructive suggestion to academic research, mechanical and production industry.
    關聯: 財團法人國家實驗研究院科技政策研究與資訊中心
    顯示於類別:[機械工程學系] 研究計畫

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML153檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋  - 隱私權政策聲明