中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/65143
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 78728/78728 (100%)
造訪人次 : 33537115      線上人數 : 1723
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/65143


    題名: 磷化銦鎵堆疊矽(GaInP / Si) 太陽電池光電模擬;GaInP / Si Tandem Solar Cell Simulation
    作者: 張瑋辰;Chang,Wei-Chen
    貢獻者: 光電科學與工程學系
    關鍵詞: 三五族太陽電池;多接面太陽電池;差排缺陷;穿隧接面;III-V multijunction solar cell;Threading dislocation;Tunnel junction
    日期: 2014-07-24
    上傳時間: 2014-10-15 14:41:44 (UTC+8)
    出版者: 國立中央大學
    摘要: 近幾年來,綠色能源的開發有極大的進展,尤其是太陽電池方面。太陽電池莫過於追求高效率,低成本的設計。太陽電池有很多種,其中矽單接面太陽電池製程效率已達25 %,理論只到26 %,為了進一步提昇效率必須採用多接面太陽電池的設計。三五族多接面太陽電池是目前最高效率的太陽電池,其中GaInP/GaAs/Si製程效率已超過44 %,但是有成本高的缺點。本篇論文目的在於提出三五族材料堆疊矽太陽能電池,結合三五族材料能隙選取與成熟的矽太陽電池技術結合,期望達到高效率,低成本的太陽電池。
    首先,探討矽基磷化銦鎵太陽電池的模擬,從抗反射層的設計提高短路電流,探討差排缺陷在於各層之間的影響,期望看到差排缺陷的容忍範圍,並探討窗口層能隙和摻雜濃度設計,阻擋少數載子的復合減少缺陷。優化結果短路電流為14.4 mA/cm^2 ,開路電壓為1.32 V,填充因子為86.72 %,效率為16.44 %。
    第二部分,探討磷化銦鎵堆疊矽太陽電池,從整體的波長抗反射設計著手,探討頂層磷化銦鎵吸收層厚度選取,期望能達到電流匹配來提昇效率。接著探討差排缺陷和復合速率影響整體多接面太陽電池短路電流和效率,最後再提到穿隧接面摻雜對於整體電池電流連接的影響。最佳短路電流為13.79 mA/cm^2、開路電壓1.92 V、填充因子 85.17 %、效率為22.48 %。
    ;There are a variety of green energy. The solar cell is discussed the most. High efficiency and low cost are the goal. The theoretical efficiency of single silicon solar cell is 26%. The multijunction design is the way to get high efficiency. The best efficiency now is III-V multijunction solar cell, but III-V multijunction solar cell is expensive. We use III-V material which can enhance the absorption in specific wavelength, and the mature fabrication technology of silicon material. We simulate GaInP / Si tandem solar cell for high efficiency and low cost.
    First, we simulate and discuss the GaInP on Si substrate solar cell. We discuss the design of antireflection coating, the threading dislocation density, the bandgap of window layer, the recombination velocity in window / emitter interface, and the doping of window layer. The optimized result are listed below. The short current density is 14.4 mA/cm^2.The open circuit voltage is 1.316 V. The fill factor is 86.72 %. The efficiency is 16.44 %.
    Second, we discuss the GaInP / Si tandem solar cell. We discuss the overall antireflection coating, the top cell thickness for current match. We also discuss how the tunnel junction doping affects the whole solar cell. The optimized result are listed below. The result of the efficiency is 22.48 %. The short current density is 13.79 mA/cm^2.The open circuit voltage is 1.915 V. The fill factor is 85.17 %. The efficiency is 22.48 %.
    顯示於類別:[光電科學研究所] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML783檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明