修正式拋物面車燈設計;Design of Modified Parabolic Vehical Headlight

NCU Institutional Repository > 理學院 > 光電科學研究所 > 博碩士論文 > Item 987654321/65160

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/65160

題名:	修正式拋物面車燈設計;Design of Modified Parabolic Vehical Headlight
作者:	李仰皓;Li,Yang-hao
貢獻者:	光電科學與工程學系
關鍵詞:	蒙地卡羅;車燈;拋物面;Monte-Carlo;headlight;paraboloid
日期:	2014-07-25
上傳時間:	2014-10-15 14:42:17 (UTC+8)
出版者:	國立中央大學
摘要:	本論文主要目的是選用拋物面作為車燈反射罩的設計，使用蒙地卡羅光線追跡法設計出符合車燈法規標準的近光燈與遠光燈，使用拋物面反射罩，將LED發光面朝上進行反射罩配置，降低由車燈產生多餘雜散光，達到減少車燈對來車駕駛造成眩光之目的。設計出一種高光源利用率77%、低功耗的車燈照明系統設計，使用上半拋物反射罩，車燈體積更有利於汽車本身流線車形設計。;The present study mainly selects the paraboloid to be a new of design the headlight reflector. Using Monte-Carlo method to design a low beam headlight and high beam headlight which consistent to the ECE regulations.Using the characteristics of paraboloidal reflector, I put the luminous surface right side up to. Reduce the unwanted stray light of the headlight, and moreover , to reduce the influence of glare for a coming driver causing by the headlight. Also, What we design is a kind of high photosource utilization (almost as high as 77%), the low-power consumption headlight lighting system ,and since just using the top half of the parabolic reflector, the volume of the car is more conducive to the car itself and the streamline car-shaped design.
顯示於類別:	[光電科學研究所] 博碩士論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	388	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing

資料載入中.....