中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/65205
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 78818/78818 (100%)
造訪人次 : 34704347      線上人數 : 1043
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/65205


    題名: 硫化鎘薄膜對軟性太陽電池特性之研究;Study of CdS films on flexible solar cells
    作者: 何誌堅;He,Jhih-jian
    貢獻者: 光電科學與工程學系
    關鍵詞: 硫化鎘;CIGS軟性太陽電池;鎘離子擴散;擴散深度;模擬;CdS;CIGS flexible solar cell;Cd ion-soaking;diffusion depth;Simulation
    日期: 2014-07-30
    上傳時間: 2014-10-15 14:43:14 (UTC+8)
    出版者: 國立中央大學
    摘要: 本實驗探討不同鎘鹽類材料所鍍製之硫化鎘(CdS)緩衝層薄膜特性,及後續鎘離子擴散處理參數對軟性CIGS太陽電池元件效率影響之研究,並以軟體模擬探討鎘離子擴散量與深度對CIGS太陽電池元件特性與實驗比較。在使用化學水浴沉積法(Chemical bath deposion, CBD)鍍製n-CdS緩衝層時,溶液中的鎘(Cd)離子會擴散進入CIGS薄膜表面,形成n-CIGS:Cd,產生電性反轉,此型態的n-CdS/n-CIGS:Cd/p-CIGS(CIGSS)介面可調控CIGS太陽電池元件之空乏區寬度、內建電場、載子濃度等特性,有助於優化CIGS元件的開路電壓及短路電流,提升元件效率。因此本實驗首先將CIGS樣品浸泡於硫酸鎘溶液,藉由調整溶液中的氨水濃度、浸泡溫度、時間等參數,分析Cd離子在CIGS薄膜表面的擴散量及深度(Cd ion soaking treatment);接著使用CBD法製作CdS薄膜,選用不同鎘鹽類材料、硫脲及氨水進行調配,藉由溶液pH值調整、鍍膜時間及溫度,控制CdS結晶顆粒大小,並製作出均勻性佳且透光性良好的CdS薄膜,其厚度約60nm,鍍製於已擴散Cd/S離子的CIGS樣品上,最後製作成CIGS太陽電池元件,得到最佳效率6.36%,VOC為0.503 V,JSC為32 mA/cm2,FF為39.1%。;In this study, it was discussed the effect of CdS films for different Cd source and Cd ion soaking treatment on the CIGS flexible solar cells. In addition, it was analyzed by the effect of Cd diffusion depth on the CIGS solar cells by simulation, comparing with experimental. During n-CdS films deposited by chemical bath deposition (CBD), Cd ion diffused into CIGS surface formed n-CIGS:Cd, resulting n-CdS/n-CIGS:Cd/p-CIGS(CIGSS) structure. This structure was a buried homo- junction, and it could widen the space charge region in CIGS solar cell, resulting in open circuit voltage (VOC) and short circuit current density (JSC) increased. Therefore, in the experimental, the CIGS films would soak into Cd ion solution with various NH3 concentrations, soaking temperature and soaking time. Then, CdS films deposited by different Cd source, and the thickness of CdS films were 60 nm. Finally, CIGS flexible solar cells were fabricated. The CIGS flexible solar cells performance was that the efficiency was 6.36%, VOC was 0.50 V, JSC was 32 mA/cm2, FF was 39.1%, improved by Cd ion soaking treatment on CIGS flexible solar cells.
    顯示於類別:[光電科學研究所] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML686檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明