中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/65957
English  |  正體中文  |  简体中文  |  Items with full text/Total items : 78937/78937 (100%)
Visitors : 39172655      Online Users : 646
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version


    Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/65957


    Title: 褐煤重液離心熱模擬成熟參數研究;A study of simulated thermal maturation from DGC lignite
    Authors: 陳煥元;Chen,Huan-Yuan
    Contributors: 應用地質研究所
    Keywords: 熱模擬;熱裂分析;熱成熟度;thermal simulation;Rock-Eval pyrolysis;thermal maturation
    Date: 2014-07-21
    Issue Date: 2014-10-15 17:19:12 (UTC+8)
    Publisher: 國立中央大學
    Abstract: 地球化學在生油材料的油氣潛能評估中一向佔有重要地位,在自然環境中不容易找到不同成熟度卻又有相同沉積材料與保存環境的煤,因此,可利用熱模擬方式將相同煤樣模擬至不同成熟度。熱模擬是一種研究油氣生成的有效方式,在實驗室中利用控制溫度的方式模擬地質環境,進而評估生油岩的油氣潛能。本研究透過比重離心方法富集低成熟度(Ro = 0.39%)褐煤之分離材料,進行200℃、250℃、300℃、350℃、450℃、500℃、550℃之熱模擬溫度,再將熱模擬完成的樣本與原始煤樣進行熱裂分析、煤素質組成分析、鏡煤素反射率量測等實驗,透過鏡煤素反射率、熱裂分析、油氣產率評估生油潛能,顯示在熱模擬溫度350℃附近生油潛能最高,其對應之鏡煤素反射率為1.35%,Tmax為451℃及產率指數為0.25,此結果與傳統油窗範圍相符。而熱模擬溫度350℃後,Tmax值、產率指數、總油產率皆有大幅度的變化,熱模擬溫度350℃附近可能是熱成熟度的重要轉折點。此外,在高成熟度區域,出現S1高於S2的現象,這可能為碳氫化合物受高溫熱成熟時發生的脫附現象。;Geochemistry plays an important role in hydrocarbon potential assessment of source rocks. In addition, thermal simulation provides an effective way to evaluate the generation of oil/gas from kerogen. This evaluation is performed under different controlled temperature in laboratory so as to simulate different geological and thermal environment. Liptinitic material were enriched by density centrifuge separation of a low maturity (Ro = 0.39%) lignite from China. 200℃, 250℃, 300℃, 350℃, 450℃, 500℃, 550℃ were then simulated in this study. Rock-Eval pyrolysis, vitrinite reflectance and maceral composition were examined after simulation. The results indicate the highest hydrocarbon potential occurred at 350℃, with Ro = 1.35%, Tmax = 450℃ and PI = 0.25, cope with the traditional oil window. Furthermore, Tmax, PI and oil yield exhibit significant change at 350℃, which implies a threshold or turning point in the process at thermal maturation. Finally, S1 > S2 in overmatured samples, which can be attributed to the desorption of hydrocarbon under high temperature.
    Appears in Collections:[Graduate Institute of Applied Geology] Electronic Thesis & Dissertation

    Files in This Item:

    File Description SizeFormat
    index.html0KbHTML695View/Open


    All items in NCUIR are protected by copyright, with all rights reserved.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明