中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/6607
English  |  正體中文  |  简体中文  |  Items with full text/Total items : 78818/78818 (100%)
Visitors : 34698416      Online Users : 1548
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version


    Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/6607


    Title: 以RF濺鍍法沉積鈮酸鋰薄膜之研究;The Study of Lithium Niobate Thin Films by RF Sputtering Method
    Authors: 黃富財;Fu-Tsai Hwang
    Contributors: 光電科學研究所
    Keywords: 鈮酸鋰薄膜;Lithium Niobate Thin Films
    Date: 2006-07-15
    Issue Date: 2009-09-22 10:23:50 (UTC+8)
    Publisher: 國立中央大學圖書館
    Abstract: 摘要 很高品質的鈮酸鋰薄膜以高頻磁控濺鍍法被沉積在矽及石英基板上可作為聲表面波及光波導的應用。我們探討過表面形態、紋理、結晶性、膜厚、折射率、消光係數等特性和濺鍍參數及退火過程之依存關係。我們由熱差分析儀測量最佳的濺鍍溫度。利用x光及低撂角x光繞射儀測試薄膜的結晶性。利用原子力顯微鏡測試薄膜表面的粗糙度。借助於原子力顯微鏡和x光繞射量測,以探討鈮酸鋰表面形態和結晶特性變化之機制。透過本研究發現最佳的濺鍍溫度約為575℃,最佳的氣體流量比Ar/O2 為1:1。同時發現較合適的RF濺鍍功率為100W。由橢圓儀量測鈮酸鋰薄膜之膜厚、折射率、消光係數,發現薄膜之折射率為2.2(波長為632.8奈米)它與發表的折射率值符合。同時我們量測到薄膜之消光係數約為零,這代表本研究沉積的薄膜適合作為光波導。 Abstract Very high quality LiNbO3 films were deposited on both silicon and quartz substrates for the applications of surface acoustic wave and optical waveguide by RF magnetron sputtering. We have investigated the dependence of the surface morphology, texture, crystallinity, thickness, refractive index, extinction coefficient properties with the sputtering parameters and annealing process. The optimum deposition temperature was measured by differential thermal analysis. The crystallinity was examined by x-ray and low angle x-ray diffractometer (XRD). The roughness of LiNbO3 thin films was examined by atomic force microscopy (AFM). AFM and XRD measurements were used to investigate the mechanisms of the variation in the surface morphology and crystallinity of LiNbO3 thin films.The optimum deposition temperature was found to be about 575℃. In this investigation the optimum ratio of the mass flow Ar/O2 was found to be about 1:1. Simultaneously, the RF power necessary for texture was found to be about 100W. The thickness, refractive index and extinction coefficient of LiNbO3 thin films were examined by ellipsometer. We have found the refractive index (n) is 2.2 (at 632.8nm), which is identical with the parameter of LiNbO3 ever reported. At the same time, the extinction coefficient of LiNbO3 thin films approachs to zero , represents that these thin films are suitable for optical waveguides.
    Appears in Collections:[Graduate Institute of Optics and Photonics] Electronic Thesis & Dissertation

    Files in This Item:

    File SizeFormat


    All items in NCUIR are protected by copyright, with all rights reserved.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明