本研究成功的證明使用氧化鐵磁性粒子與二甲基矽氧烷(PDMS)製作出磁性PDMS裝置，其為一種簡單製作且可以達到高強度的可逆磁性接合方法；在此提出了兩種磁性PDMS裝置，包括不可光學檢測的暗視野裝置與可光學檢測的明視野裝置。 研究顯示，暗視野裝置製作上類似標準的PDMS鑄造，較不受微流道幾何形狀的影響；而明視野裝置澆鑄性能與微流道幾何圖形高度有關，實驗針對微流道的佈局進行了詳細的研究，探討PDMS墊塊層與微模具基板之間的間隙大小對於製作明視野裝置的相關性。磁性PDMS裝置接合強度測試中，證明在裝置底部增加一層PDMS薄膜層可以有效改善表面粗糙度，並且有效的提升磁性PDMS的可逆磁性接合強度。測試結果顯示，有PDMS薄膜的暗視野裝置最佳接合強度為110 KPa；而有PDMS薄膜的明視野裝置最佳接合強度為81 KPa。 ;Iron oxide magnetic microparticles and poly(dimethylsiloxane) (MMPs-PDMS) composite was successfully demonstrated as a simple and high-strength reversible magnetic bonding method in this study. Dark-field (optical inspection impossible) and light-field (optical inspection possible) MMPs-PDMS casting were presented. This study showed that microchannel geometries have limited influence on dark-field casting which is similar to standard PDMS casting. Light-field casting performance was highly related to microchannel geometries. Effects of the microchannel layout, and the gap between the cover-PDMS layer and micromold substrate were detail investigated. MMPs-PDMS magnetic bonding experiments showed that thin PDMS film incorporating an MMPs-PDMS layer can effectively reduce surface roughness and enhance MMPs-PDMS reversible magnetic bonding strength. A thin PDMS film-coated dark-field MMPs-PDMS device exhibited the greatest bonding strength of 110 KPa. For a light-field MMPs-PDMS device with a thin PDMS film, a magnetic bonding strength of 81 KPa can be achieved.
