中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/6792
English  |  正體中文  |  简体中文  |  Items with full text/Total items : 80990/80990 (100%)
Visitors : 42141954      Online Users : 922
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version


    Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/6792


    Title: 直流磁控濺鍍輔以氧離子助鍍光學薄膜於塑膠基板DC;reactive magnetron sputtering with IAD for optical coatings on plastic substrate
    Authors: 邱繼暐;Chi-Wei Chiu
    Contributors: 光電科學研究所
    Keywords: 磁控濺鍍;附著力;塑膠基板;adhesion;plastic substrate;magnetron sputter
    Date: 2004-06-23
    Issue Date: 2009-09-22 10:28:36 (UTC+8)
    Publisher: 國立中央大學圖書館
    Abstract: 我們利用反應式氧離子助鍍直流磁控濺鍍法來濺擊鉭(Tantalum)與矽靶(Silicon)以製備Ta2O5及SiO2之光學薄膜。以Ar為工作氣體,探討氧離子助鍍在能量、電流大小及轉速對於膜質之光學性質、沈積速率的影響。且基於磁控濺鍍可低溫鍍製薄膜的特性,將所得之最佳參數應用於塑膠基板上。藉由穿透率光譜圖及ESCA分析及膠帶測試討論離子轟擊對於塑膠基板附著力之影響與變化。 實驗結果顯示,以氧離子助鍍磁控濺鍍法於塑膠基板上鍍製抗反射膜,在波長450~700nm處可達平均反射率小於0.8%,最低反射率0.2%,參考波長550nm也有0.7%左右。而以離子轟擊清潔基板增加附著力的處理,可使基板附著力由0B改進至3B。若取商用TACHC膜為基板更能達到5B的規格,唯經離子轟擊後的塑膠膜,光學成效會偏離設計,推測乃因受熱導致膜質改變。 Thin films of Ta2O5 and SiO2 are prepared by oxygen ion-assisted DC magnetron sputtering of Tantalum and Silicon targets, respectively, using argon and oxygen as the working gas. The influences of oxygen flow rate, current and substrate holder rotation speed were investigated. The refractive indices and absorption coefficients were determined in the 350~850 nm wavelength range by envelope method. We also have discussed the effect of oxygen ion bombardment on the adhesion between TAC (triacetyl-cellulose) films and optical thin films by tape test and ESCA. Experimental results show that:(1) a four layers AR coating reduced the residual reflectance to an average value of 0.8% in the spectral range from 450~700 nm (2) ion bombarding improves the adhesion between the optical thin film and plastic substrate, after ion bombardment pre-treatment, coatings on TAC pass the ASTM 3B and TACHC pass the ASTM 5B specification but the optical performance is affected. The influence of pre-treatment on TACHC film is smaller than the TAC film. To have good optical performance and the adhesion, the TACHC is possibly the solution.
    Appears in Collections:[Graduate Institute of Optics and Photonics] Electronic Thesis & Dissertation

    Files in This Item:

    File SizeFormat


    All items in NCUIR are protected by copyright, with all rights reserved.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明