中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/68120
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 78728/78728 (100%)
造访人次 : 33560989      在线人数 : 740
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/68120


    题名: 壓應力效應下優選方向Cu(111) -Pd與Cu(220)-Pd之交互擴散行為研究;Study of Cu-Pd interdiffusion in preferred Cu(111) and Cu(220) under compressive stress 研 究
    作者: 楊崑暉;Yang,Kun-Hui
    贡献者: 化學工程與材料工程學系
    关键词: 應力效應;擴散;擴散係數;stress effect;diffusion;diffusion coefficient
    日期: 2015-07-17
    上传时间: 2015-09-23 10:45:11 (UTC+8)
    出版者: 國立中央大學
    摘要: 隨著IC 的線寬不斷縮小並接近至極限時,3D IC 的技術發展能使
    系統之效能及功能提昇,其概念是利用垂直晶片疊覆(chip stacking)
    的方式將晶片構裝,其中,W2W 封裝方式效率高而成為未來發展的
    主流。另外,在Thin-GaN LED 方面,W2W鍵合技術也因為發光面
    積大、垂直式電流導通結構以及較均勻電流分散等特性,將是未來主
    要發展的趨勢。W2W bonding 在金屬接合技術有兩個種類:(1) 固態
    金屬與液態金屬鍵結、(2) 固態金屬與固態金屬鍵結。其中,固態/
    固態金屬鍵合是未來發展的重要趨勢,原因在於低溫晶圓鍵合技術可
    以有效減少金屬界面層交互擴散的行為,進而避免高溫鍵合界面中介
    金屬化合物形成,避免造成脆性的界面,而避免嚴重的交互擴散現象
    所造成元件特性的破壞。除了上述的狀況,低溫晶圓鍵合亦會降低不
    同晶圓材料間鍵合時,因熱膨脹係數差異所造成的熱應力的問題,因
    此,發展低溫固態鍵合是重要的議題。
    透過固態/固態金屬鍵結中原子擴散研究:平行於擴散軸施加壓應
    力對於固態金屬間交互擴散中的整體自由能會增加,進一步導致原子
    擴散所要跨越的能障降低的概念,並且在施加壓應力後對於兩種不同
    優選方向電鍍銅層可以影響銅鈀交互擴散能障。本研究針對這些議題
    設計實驗並以Boltzmann 分布中原子能跨越能障進行擴散的機率概
    念,逐步探討在施加壓壓力效應下主導在銅(111)與銅(220)晶格優選
    方向系統裡有明顯擴散行為差異以及關鍵因素。;In recent years, three-dimensional integrated circuit (3D IC) has been
    agreed as the next generation semiconductor technology with the
    advantages of small form factor, high-performance, low power
    consumption, and high density integration. In the 3 type bonding
    technology: chip-to-chip, chip-to-wafer, and wafer-to-wafer.,
    wafer-to-wafer technology can be applied for homogeneous integration of
    high yielding devices and plays important role in productive efficiency of
    3D IC. However, wafer-to-wafer bonding technology also has the
    advantages in Thin-GaN LED: (1) uniform current spreading and (2) high
    emitting area. Therefore, wafer-to-wafer technology will be important
    technology in the future.
    In wafer-to-wafer technology, solid/solid metal bonding has the
    property that bonding can be finished at low temperature (150~250℃). It
    will be important for future development: (1) Prevent the formation of
    intermediary metal compounds (IMC) at bonding interface, (2) Avoid the
    residual stress which produced by CTE mismatch in high temperature
    process. Compare with Cu-Cu direct bonding, we find that Cu-Pd-Cu
    bonding can be finished at lower bonding temperature. Importantly,
    external stress can reduce the finished bonding temperature, which be
    attributed to reduced energy barrier in solid state interdiffusion. Therefore,
    base on the concepts of successful atom-vacancy diffusion’s probability
    in Boltzmann distribution, the important factor in the difference between
    Cu(111)-Pd and Cu(200)-Pd with external stress will be discussed.
    显示于类别:[化學工程與材料工程研究所] 博碩士論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML548检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明