中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/68128
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 78818/78818 (100%)
造访人次 : 34716858      在线人数 : 1359
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/68128


    题名: 先進電離層探測儀數位控制單元之研製
    作者: 蔡豐名;Cai,Feng-ming
    贡献者: 太空科學研究所
    关键词: 先進電離層探測儀;Advanced Ionospheric Probe
    日期: 2015-07-13
    上传时间: 2015-09-23 10:47:01 (UTC+8)
    出版者: 國立中央大學
    摘要: 福衛五號科學酬載-先進電離層探測儀(Advanced Ionospheric Probe, AIP),在實體上分為探測器與科學酬載電子系統(Science Payload Electronics Unit, SPEU)。SPEU主要負責控制探測器的運作與後端指令與資料管理單元(Command and Data Management Unit, CDMU)的通訊。整體放置在較大的衛星本體上自不成問題,但若要安置在微衛星或立方衛星上,其體積與重量便可能超過衛星本體的限制。本論文將研製一片數位控制單元(Digital Control Unit, DCU)取代SPEU,其可直接裝置在AIP的探測器內,並與先前的介面和規格相容。如此不僅大幅縮小AIP的大小與重量,卻不減損原先的功能。該DCU使用Xilinx Spartan-6 Field Programmable Gate Array (FPGA),利用VerilogHDL撰寫程式,達成相關功能。電路採用NI Multisim 設計圖示與NI Ultiboard達成佈局,並符合該FPGA的設計規範。研製的DCU可與福衛五號AIP的探測器相結合,透過NI CompatctRIO 與NI LabVIEW所構成的地面電子測試設備來模擬後端CDMU,達成功能驗證的可能。;Advanced Ionosphere Probe (AIP), a science payload aboard the FORMORSAT-5 satellite, is combined with a sensor head and a control unit, Science Payload Electronics Unit (SPEU). The SPEU is used to control AIP operation and to communicate with Command and Data Management Unit (CDMU). Under the current configuration, the AIP is difficult to be installed inside a CubeSat or a MicroSat due to volume and mass. In this thesis, a Digital Control Unit (DCU) is developed to replace the SPEU and can be installed inside the AIP sensor head compatibly. The new configuration simplifies communication difficulties and results in extremely reduction in the physical property but the same capabilities. The DCU uses Xilinx Spartan-6 Field Programmable Gate Array (FPGA) and is programmed in VerilogHDL. The schematic of the DCU is designed by NI Multism and the layout finished by NI Ultiboard under standard designs of the Xilinx Spartan-6 FPGA. All the DCU functions have been verified by an in-house Electrical Ground Segment Equipment which is constructed by NI CompatctRIO with in-house modules and programmed in NI LabVIEW.
    显示于类别:[太空科學研究所 ] 博碩士論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML340检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明