中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/69004
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 69561/69561 (100%)
造访人次 : 23155236      在线人数 : 402
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/69004


    题名: CAE應用之圓角簡化技術發展;ON THE DEVELOPMENT OF FILLET SUPPRESSION TECHNOLOGY FOR CAE APPLICATION
    作者: 黃丹同;Thuong,Huynh Thanh
    贡献者: 機械工程學系在職專班
    关键词: 特徵簡化;B-rep;圓角;Blend suppression
    日期: 2015-08-05
    上传时间: 2015-09-23 14:52:46 (UTC+8)
    出版者: 國立中央大學
    摘要: 在CAE (Computer aided engineering)分析中,使用有限元素(Finite element)技術以模擬產品的設計結果是最為常見的方法,以取代人為的測試或經驗。此技術中網格化是最重要的步驟,但模型的特徵往往由多個面或很小的面所組成,造成網格尺寸勢必縮小與面接近。尤其在於倒圓角(Blend faces)中往往為狹長面,導致網格數增加,不只增加電腦計算時間,也影響網格品質與模擬結果,因此必須要改善狹長型的倒圓角在網格化中的問題。本研究發展一演算法,以B-rep (Boundary representation)資料格式的模型為基礎,將倒圓角進行簡化,方法主要分為:產生幾何曲面資料以取代原本的倒圓角面、刪除原本倒圓角的曲面資料、更新所有B-rep中的拓樸資訊。最後使用數個案例進行測試,當模型經過簡化演算法計算後,會產生所有倒圓角均被簡化的新模型,以驗證此演算法的可行性。;CAE (Computer Aided Engineering) analysis is a common tool to replace physical test. It often employs the Finite Element (FE) method to analyze and simulate the product design. In finite element method of CAE analysis, mesh generation is an indispensable operation. But, one of the problems found in going from CAD to CAE is that CAD models often feature a large number of faces, and many of them are much smaller than the desired finite element size. Specially, the appearing and existing of small blend faces on a CAD model affects the quality of analysis. It not only increases the analysis time but also produces poor simulation results. Hence, small blend face simplification on CAD models for mesh generation is essential to improve the quality of finite elements to analysis. This study develops the algorithms to simplify small blend faces for producing better models for FE based on the understanding the B-rep (Boundary representation) model. It includes the following main operations: generate new geometric data to replace all small blend faces, add new elements into B-rep, delete all elements related to small blend faces and update all topological data of the B-rep. All small blend faces can be suppressed, after the above operations are accomplished, which yields the simplified CAD model without small blend faces. The simplified CAD model without small blend faces will be obtained. In addition, several examples are presented to demonstrate the feasibility of the proposed method for small blend simplification.
    显示于类别:[機械工程學系碩士在職專班 ] 博碩士論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML379检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈  - 隱私權政策聲明