中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/69346
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 66984/66984 (100%)
造訪人次 : 22956904      線上人數 : 487
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/69346


    題名: Seismic Performance of Framed Structures with Double-sided Trapezoidal Steel Plate Infill Walls
    作者: 鄧彩雅;Chairyah,Dara Zam
    貢獻者: 土木工程學系
    關鍵詞: 波浪鋼板;填充牆;消能裝置;耐震性能;Trapezoidal steel plate;Infill wall;Energy dissipation;Seismic performance
    日期: 2016-01-28
    上傳時間: 2016-03-17 18:31:43 (UTC+8)
    出版者: 國立中央大學
    摘要: 抗彎構架(MRF)已被廣泛用作抵抗側力之系統,雖然此系統具
    有良好的韌性,但因勁度較低導致其受力時會產生過大的變形。為了
    改善上述抗彎構架之缺點,本研究提出雙面波浪鋼板填充牆構架系統。
    研究中針對六組構架,包括一組空構架以及五組配置不同彎折角度之
    波浪鋼板填充牆構架,施以反覆側向力進行試驗,藉此探討單面波浪
    鋼板填充牆(ST 系列)與雙面波浪鋼板填充牆(DT 系列)之強度、勁度
    和消能容量,以評估波浪鋼板填充牆之耐震性能。由實驗結果得知,
    當單面與雙面波浪鋼板填充牆與構架具適當接合時,其耐震行為表現
    良好。相較於單面波浪鋼板填充牆,雙面波浪鋼板填充牆具有更佳的
    耐震行為。此外,本研究利用有限元素模擬分析和理論分析所獲得的
    結果,與試驗結果進行比較,由比較結果得知,本研究所提出之方法
    具適當正確性,為有效之分析方法。;Moment resisting frames(MRF) have been commonly used as lateral load resisting systems. The MRF systems possess significant ductility, however lower stiffness that usually incur excessive deformation.To improve the performance of MRF, application of inovative double-sided trapezoidal steel plate infill wallwas proposed in this study. A series of experimental and analytical investigations were carried out. Six frame structures, including one bare frame and five frames with various arrangements of corrugated plate infill walls were tested under cyclic load.The strength, stiffness and energy disspation of frames with single-sided (ST Series) and double-sided (DT Series) trapezoidal steel plate infill walls were compared to evaluate the seismic performance of the proposed design. It was found from the test results that both ST and DT specimens exhibited high performance when adequate connections between the plate and surrounding frame members were designed. Further comparisons on the responses of ST and DT specimens indicated that higher performance gains was achieved when double sided trapezoidal plates were used. Finally, the test results were compared with the results obtained from finite element simulation and analytical calculation. Adequate accuracy was achieved which justified the effectiveness of the proposed design method and the analytical model.
    顯示於類別:[土木工程研究所] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML309檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋  - 隱私權政策聲明