中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/69407
English  |  正體中文  |  简体中文  |  Items with full text/Total items : 80990/80990 (100%)
Visitors : 41648743      Online Users : 1526
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version


    Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/69407


    Title: 利用電控動態手紋結構製作雙穩態散射型液晶光閥之研究;Studies of bistable scattering mode liquid crystal light modulators by electrically switchable dynamic fingerprint chiral textures
    Authors: 李柏逸;Lee,Po-Yi
    Contributors: 光電科學與工程學系
    Keywords: 動態手紋結構;雙穩態;散射;液晶;光閥;DFCT;bistability;scattering;liquid crystals;light modulators
    Date: 2016-01-21
    Issue Date: 2016-03-17 20:35:32 (UTC+8)
    Publisher: 國立中央大學
    Abstract: 隨著現今科技的發展,液晶技術日趨成熟,於智慧型窗戶應用的技術中,早有多種液晶散射光閥已成功被開發,最著名的為聚合物分散型液晶(Polymer Dispersed Liquid Crystals, 縮寫為PDLC),其多數利用照射UV光或加熱使單體聚合而引致液晶與聚合物發生相分離,並藉由外加電壓得到散射態和穿透態的切換。值得一提的是一般散射型液晶光閥須持續外加電壓方能維持其穿透度,換言之即造成能源的浪費,因此雙(多)穩態散射型液晶光閥的研究便受到相當的重視。
    本論文提出利用電控動態手紋結構(Dynamic fingerprint chiral textures)製作一雙(多)穩態散射型液晶光閥,根據實驗結果,利用外加不同頻率的電場可在穿透態及散射態之間作切換,且在電場關閉後仍能維持永久穩定的穿透態及散射態,此動態手紋結構為本論文首先提出。本論文將分別討論(1)動態手紋結構的定義及其切換機制、(2)電控動態手紋結構的光電特性及(3)相關材料特性比較及其生成穩態的原因。其主要散射機制為利用外加高低頻交流電場切換動態手紋結構之區塊大小,外加高(低)頻交流電場可得較大(小)區塊之動態手紋結構而得穿透態(散射態),此外,由穿透態切換至散射態所需的電場振幅隨頻率降低而減小;反之,由散射態切換至穿透態所需的電場振幅隨頻率增加而減小。除關閉電壓後其穿透度可持續穩定外,該散射型光閥之散射能力與入射光偏振無關,且其穿透態無如上述PDLC有視角的限制。因此,本論文所提出之散射型液晶光閥具有可電控、永久穩態、廣視角、高對比及低操作電壓等特性,相信能在實際應用上有相當的潛力,如顯示器、電子書及電子紙等。
    ;Liquid crystal (LC) technology is getting maturer and maturer nowadays due to its technological development. Many scattering mode LC light modulators are adopted to the application of smart windows. Among them, polymer dispersed LCs (PDLCs) is the most famous technique for such applications. Regarding the fabrication processes, phase separation of LCs and polymers by illuminating with UV light or heating is the most important approach. Additionally, the switching of the light modulator between transparent and scattering modes by applying an external electric field is also achieved. However, most of the scattering mode LC light modulators consume too much power to be suitable for practical application due to the continuous application of electric field. Restated, it causes large power consumption. Accordingly, bistable and multi-stable scattering mode LC light modulators have been paid much attention recently.
    This study presents an electrically switchable and permanently stable scattering mode LC light modulator by dynamic fingerprint chiral textures (DFCT). According to the experimental results, stable transparent and scattering modes can be switched between each other after an electric field with different frequencies is applied. To the best of our knowledge, electrically switchable DFCT is demonstrated for the first time in this system. In this thesis, the following three parts, including (1) the definition of DFCT and its electric switching mechanism, (2) the electro-optical properties of electrically switchable DFCT, and (3) the comparison of the electro-optical properties between the other chiral materials and the causes for stabilization of DFCT, will be discussed in detail. Briefly, the main mechanism is the switching between large and small domains of DFCT by applying an electric field with different frequencies. With the application of electric field having high (low) frequency, the LC light modulator presents transparent (scattering) state due to the formation of large (small) domains of DFCT. Besides, the required amplitude to switch the light modulator from a scattering (transparent) state to a transparent (scattering) state decreases as the frequency of the applied electric field increases (decreases). In addition to the permanent stabilization after the applied field is switched off, such a LC light modulator has some other advantages, such as polarization-independent scattering, unlimited viewing angle in transparent mode, and others. Consequently, this study presents a scattering mode LC light modulator with the advantages of electrical switching, permanent stabilization, wide viewing angle, high contrast, low driving voltage, and so on. Considering the practical applications of LC devices, it is believed that such novel textures, DFCT, can be adopted to develop displays, e-books, e-papers, etc.
    Appears in Collections:[Graduate Institute of Optics and Photonics] Electronic Thesis & Dissertation

    Files in This Item:

    File Description SizeFormat
    index.html0KbHTML499View/Open


    All items in NCUIR are protected by copyright, with all rights reserved.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明