中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/69512
English  |  正體中文  |  简体中文  |  Items with full text/Total items : 75982/75982 (100%)
Visitors : 28165895      Online Users : 196
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version


    Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/69512


    Title: 空氣對空器在塑膠板式熱交換器之性能測試分析;Development of Polymer Plate Heat Exchanhers for Outdoors Telecom Cabinet Cooling Systems
    Authors: 姜羚;Chiang,Ling
    Contributors: 機械工程學系
    Keywords: 熱傳增強;塑膠板式熱交換器;heat transfer enhancement;polymer plate heat exchanger
    Date: 2016-01-19
    Issue Date: 2016-03-17 20:48:36 (UTC+8)
    Publisher: 國立中央大學
    Abstract: 在電信箱、電池箱或是電力控制箱中,一般多使用空氣對空氣熱
    交換器,將內部空氣與外部空氣隔離分別循環而進行熱交換,以避免
    外氣直接進入。前述之空氣對空氣熱交換器,多使用薄鋁片堆疊而成,
    將內外側空氣分別通於各鋁片兩側,透過鋁片傳遞熱量。本研究以實
    驗方法探討空氣對空氣在塑膠板式熱交換器之熱傳壓降性能。兩種塑
    膠板式熱交換器分別為山型紋角度65 及主要山型紋角度為30 度、兩
    側入口角度為65 度之板式熱交換器。由實驗結果可得知,山型紋流
    道型式能有效提高熱傳。混合角度30+65 山型紋板片的熱傳較鋁板片
    高,同時壓降也略高,但混和角度之板片相較於65 度山型紋板片確
    實能有效降低壓降。
    ;Air-to-air heat exchanger is generally used in the telecom equipment cabinet to divide the outside and inside air streams and exchange heat between these two air streams. Thin aluminium plates with ripple surface and protrusion are commonly used in these kinds of heat exchangers. This study provides a heat transfer enhancement design and experimental analysis of thin plastic air-to-air heat exchangers. Two plastic plate heat exchangers, one with 65o chevron angle and the other with chevron angle of 30o in the main stream and 65o in the inlet and exit passages was designed and tested. From the experimental results, we found that the chevron flow passage is able to significantly enhance the heat exchangers’ heat transfer performance. The 30o+65o chevron heat exchanger provides a lower pressure drop but higher heat transfer performance than other two heat exchangers. It is the optimal design for air-to-air heat transfer in the range tested.
    Appears in Collections:[Graduate Institute of Mechanical Engineering] Electronic Thesis & Dissertation

    Files in This Item:

    File Description SizeFormat
    index.html0KbHTML391View/Open


    All items in NCUIR are protected by copyright, with all rights reserved.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明