English  |  正體中文  |  简体中文  |  Items with full text/Total items : 75982/75982 (100%)
Visitors : 28173573      Online Users : 170
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version

    Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/69525

    Title: 利用白金奈米粒子製備多孔矽結構梯度表面之潤濕性研究
    Authors: 陳宏哲;Chen,Hung-zhe
    Contributors: 機械工程學系
    Keywords: 多孔矽結構;金屬輔助化學蝕刻;薄膜熱退火;潤濕性;液滴移動
    Date: 2016-01-27
    Issue Date: 2016-03-17 20:49:22 (UTC+8)
    Publisher: 國立中央大學
    Abstract: 近年來微流體的技術迅速發展,其應用擴及生物科技、醫療技術,機密機械潤滑等,尤其在生物醫學檢測的應用上具有非常大的潛力。透過半導體製程使生醫晶片微小化,降低檢測樣品試劑之體積,並增加感測精度。趨動微流體可利用壓力差、電濕潤、毛細力、化學梯度、熱泳或光泳等方式,其中利用結構表面粗糙度差異驅使液滴移動的方式具有操作容易與製程簡單的優點,然而大部分的研究多是利用分段的結構梯度進行相關實驗。本文利用金屬輔助化學蝕刻,利用遞增的金屬膜厚製備出連續的奈米多孔矽結構梯度,探討液珠於結構梯度表面移動情形。

    ;Microfluidics has been grown up very fast recently, and widely used in biomedical and chemical analysis, and precision machinery lubrication. Microfluidic devices utilize microfabrication to minimize thier size, which can reduce the amount of test samples and reagents, enhance the accuracy of detection. The droplet-based microfluidic device is one of the promising technologies. The droplet can be driven by pressure difference, electro-wetting, capillary force, chemical gradient, thermophoresis, photopheresis and so on. Among these, the capillary force or the use of surface roughness changes has the advantage of simple operation and simple manufacturing process. However, most of the literatures only demonstrate the feasibility of water movement between two discrete surfaces with different roughnesses. In this study, we use metal assisted chemical etching to make nano porous silicon structure with continuous change in the surface roughness and investigate the drops movement on the surface.

    Porous silicon structure has large surface to volume ratio Metal assisted chemical etching process is an simple and cost effective way to make porous silicon. In this research, we deposit platinum films and use thermal annealing to make nano particles for the following metal assisted chemical etching. The corresponding nano structures can be made by adjusting different thickness of platinum films and different etching times. The relationship between different thickness of platinum films and etching times is investigated. The contact angle and hysteresis are measured to study the wettability of the porous surfaces. Different metal thickness is made by steady pulling the sample out of the etchant, that is then annealed and etched to produce porous structural with continuous structure size gradients. The results show that the driving force given by continuous porous structural gradients is very small, and is unable to drive the liquid drops. On the other hand, we find that there is a different hysteresis between the structural gradients on the two sides from the contact angles measurements of the inclined surface. Finally, we use squalane to test the capillary motion on the surface, which shown that squalane will move further toward the area with smaller pore structures.
    Appears in Collections:[機械工程研究所] 博碩士論文

    Files in This Item:

    File Description SizeFormat

    All items in NCUIR are protected by copyright, with all rights reserved.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明