以鎖模鈦藍寶石飛秒雷射雙光子聚合製作光波導微結構之研究;Fabrication of waveguiding micro-structures using two photon polymerization by mode-locked Ti:sapphire femtosecond laser

NCU Institutional Repository > 理學院 > 光電科學研究所 > 博碩士論文 > Item 987654321/7017

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/7017

题名:	以鎖模鈦藍寶石飛秒雷射雙光子聚合製作光波導微結構之研究;Fabrication of waveguiding micro-structures using two photon polymerization by mode-locked Ti:sapphire femtosecond laser
作者:	曾家瑋;Jia-Wei Tzeng
贡献者:	光電科學研究所
关键词:	雙光子吸收;雙光子聚合;鎖模飛秒雷射;two-photon absorption;two-photon polymerization;mode locked femtosecond laser
日期:	2008-09-22
上传时间:	2009-09-22 10:34:56 (UTC+8)
出版者:	國立中央大學圖書館
摘要:	本研究以鎖模之鈦藍寶石飛秒雷射在高分子材料中引發雙光子吸收效應以製作波導微結構。雷射光以物鏡聚焦於光阻膜中，藉由短脈衝雷射的高瞬時功率引發雙光子吸收使光阻產生聚合反應，以此機制製作出可傳輸光訊號的波導，實驗中探討多項製程參數與製作成果的關係，並與理論模型相驗證，推導出能使光阻聚合的最低閥值曝光劑量，並以此為依據成功製作出截面結構尺寸為20μm×20μm 的光波導，其在波長532nm 的傳輸損耗為0.79dB/cm。此外，本研究也嘗試以控制光束入射方向的方式一次構裝波導與微反射面，目前尚無法完成45°之斜面供光連結技術應用，但證實改變光束入射方式可製作出擁有斜面的波導結構，利用模擬和實驗比較，為將來改良製程提供方向。In this thesis, waveguiding micro-structures fabricated using two photon absorption induced polymerization are reported. Mode-locked Ti:sapphire femtosecond laser is focused via an objective lens onto a layer of photoresist which is transparent to the operating wavelength (?=800nm). Parameters such as the output power of the laser and the translation speed of the sample are scanned aiming at resolving the threshold fluence for waveguide fabrication. The experimental results were in close agreement with the theoretical calculation giving a reliable estimation to fabricate waveguides with controllable cross-sections. A polymer waveguide with 20μm×20μm in cross-section was demonstrated,and the propagation loss was measured to be 0.79dB/cm at wavelength of 532nm. To integrate waveguides and micro-mirrors in a single fabrication step, direct write was carried out with tilted incidence. The result shows that waveguides with inclined side-walls can be achieved however exact 45-degree turning mirror was not possible due to the limitation of the refraction angle predicted by Snell’s law. Future areas of directions are discussed to overcome this problem.
显示于类别:	[光電科學研究所] 博碩士論文

文件中的档案:

档案	大小	格式	浏览次数

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....