English  |  正體中文  |  简体中文  |  Items with full text/Total items : 69937/69937 (100%)
Visitors : 23266177      Online Users : 497
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version

    Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/71733

    Title: 利用異質孔徑界面增強多孔介質內流體驅替效果之研究
    Authors: 林鴻諭;Lin,Hung-Yu
    Contributors: 能源工程研究所
    Keywords: 異質孔徑界面;驅替;多孔隙介質;指狀流動;碎形維度;空氣注入飽和度;heterogeneous pore-scale boundary;displacement;porous medium;fingering flow;fractal dimension;air injection saturation
    Date: 2016-08-25
    Issue Date: 2016-10-13 13:49:25 (UTC+8)
    Publisher: 國立中央大學
    Abstract: 本文為利用異質孔徑界面增強低黏度空氣於多孔隙介質驅替高黏度矽油效果之研究。實驗採用一水平線性Hele-Shaw cell系統填充含異質孔徑界面之多孔隙介質,此異質孔徑界面為兩種粒徑玻璃珠組成之多孔隙異構性組合系統,內部充滿高黏度矽油。實驗觀察低黏度空氣推動多孔隙介質內高黏度矽油過程中,發現指狀流動為高黏度流體驅替效果低落之原因。為建立一套增強低黏度流體驅替多孔隙介質內高黏度流體之方法,實驗設計五種粗、細玻璃珠所占長度比例不同之多孔隙異構性組合,分別為1:0、3:1、1:1、1:3、0:1,分析不同空氣注入流率對於不同粒徑介質內部高黏度流體驅替之結果。
    ;This research presents an experimental study of enhancing fluid displacement through porous media with a heterogeneous pore-scale boundary, where the displaced fluid (silicone oil) was more viscous than the displacing fluid (air). We used a horizontal linear Hele-Shaw cell with two different sizes of glass beads to model the porous media with different pore sizes. Previous research has shown that a fluid cannot uniformly displaces another relatively more viscous fluid through a porous medium, leaving a finger-like flow pattern in the medium. In order to create a system for more effectively displacing viscous fluid through a porous medium, we proposed a heterogeneous porous medium model. Five different length ratios (1:0, 3:1, 1:1, 1:3, 0:1) of coarse glass bead region to fine glass bead region were considered.
    Using this heterogeneous porous medium model, fluid displacement experiments with different air injection rates were performed. Our results showed that much more viscous silicone oil in the coarse glass bead region could be displaced by the less viscous air because the heterogeneous pore-scale boundary prevented the finger-like flow from directly invading into the fine glass bead region. With lower air injection rates the viscous finger had higher fractal dimensions, which could also increase the displaced fluid volume. Comparing the results from the five heterogeneous configurations, we found that shortening the length of the coarse glass bead region increased the ratio of displaced fluid volume in the porous medium, resulting in higher air injection saturation results.
    Appears in Collections:[能源工程研究所 ] 博碩士論文

    Files in This Item:

    File Description SizeFormat

    All items in NCUIR are protected by copyright, with all rights reserved.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - Feedback  - 隱私權政策聲明