中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/72166
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 78818/78818 (100%)
造访人次 : 34655142      在线人数 : 1730
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/72166


    题名: 圓極化介質共振天線設計;Design of Circularly Polarized Dielectric Resonator Antenna
    作者: 張耀仁;Chang,Yao-jen
    贡献者: 電機工程學系
    关键词: 介質共振天線;圓極化;Antenna;Dielectric Resonator Antenna;DRA
    日期: 2016-07-21
    上传时间: 2016-10-13 14:29:34 (UTC+8)
    出版者: 國立中央大學
    摘要: 本篇論文探討應用於S-band之圓極化介質共振天線之設計,並詳細說明設計理論及設計流程。本研究提出之圓極化介質共振天線中心頻率設計在3.3 GHz,使用Rogers Ro3200電路板來製作介質共振器,介質共振器之介電常數ε_r=10.2,量測之反射損耗頻寬為2.33 GHz-4.38 GHz(61.1%),軸比頻寬為2.722 GHz-3.405 GHz(22.3%)。Peak gain 達到2.39dBic。
    首先,以矩形介質共振器理論選取介質尺寸,介質之長寬高分別為26.1mm、14.3mm、25.4mm,並以對稱位置之單一銅箔貼片饋入結構驗證介質內之線性共振模態電磁場分佈與理論一致,接著,利用不對稱位置之單一銅箔貼片激發介質共振器產生兩個方向互相垂直且相位差達到〖90〗^° 的模態〖TE〗_111^x、〖TE〗_111^y達成圓極化效果,天線模擬之反射損耗頻寬2.58 GHz-3.84 GHz(39.2%),模擬之軸比頻寬為3.05 GHz-3.26 GHz(6.6%),再藉由另一銅箔貼片饋入去調整兩個方向互相垂直且相位差達到〖90〗^°之模態,使其電場大小相等,天線微調過後反射損耗頻寬為2.62 GHz-3.49 GHz(28.5%),軸比頻寬為2.87 GHz-3.48 GHz(19.3%),軸比頻寬得到明顯改善,由6.6%提升至19.3%。;This thesis presents a circulary polarized dielectric resonator antenna used in the S-band. The cp-DRA S11 bandwidth is 2.33GHz-4.38GHz(61.1%),AR bandwidth
    is 2.72GHz-3.405GHz(22.3%).Peak gain reached 2.39 dBic. The dielectric constant of the delectric resonator is 10.2.

    The first part of the thesis describes using the rectangular DRA formula to choose DRA size with 26.1mm*14.3mm*25.4mm, and using High Frequency Structure
    Simulator (HFSS) to study the resonant modes in the dielectric resonator.

    Second part is focused on producing cp-DRA by using copper patch in asymmetry feed position, generate 〖TE〗_111^x、〖TE〗_111^y modes in the cp-DRA.The simulation of first cp-DRA S11 bandwidth is 2.58GHz-3.84GHz(39.2%), AR bandwidth is 3.05GHz-3.26GHz (6.6%).

    Finally, add other one copper patch to adjust electric field amplitude of the two resonant modes, improve AR bandwidth from 6.6% to 19.3%. The simulation of
    second cp-DRA S11 bandwidth is 2.62GHz-3.49GHz (28.5%), AR bandwidth is 2.87GHz-3.48GHz (19.3%).
    显示于类别:[電機工程研究所] 博碩士論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML239检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明