中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/7353
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 78937/78937 (100%)
造訪人次 : 39359362      線上人數 : 505
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/7353


    題名: 鈀/鎢(111)和鈀/鉬/鎢(111)表面的可逆皺/平相變之研究;Mass Transport of Adsorbate During Reversible faceted/planar phase transition for Pd/W(111) and Pd/Mo/W(111)
    作者: 高光正;Kuang-Cheng Kao
    貢獻者: 物理研究所
    關鍵詞: 相變;phase transition
    日期: 2003-06-17
    上傳時間: 2009-09-22 10:56:05 (UTC+8)
    出版者: 國立中央大學圖書館
    摘要: 在超高真空(約1 x 10-10 torr)的環境下,我們利用了可程式控溫歐傑能譜(Temperature Programmed Auger, TPA)和可程式控溫低能量電子繞射(Temperature Progammed Low Energy Electron Diffraction, TPLEED)和可程式控溫熱脫附(Temperature Progammed Desorption ,TPD), 來研究鈀(Pd)覆蓋層及鉬(Mo)中間層對於鎢(W)基版的影響,亦即Pd/W(111)和Pd/Mo/W(111)表面系統中,溫度對表面結構變化的影響。在Pd/W(111)的系統中,我們用TPLEED得到表面在高溫下的即時資訊,進而觀測到可逆的皺/平相變 : (111)?? {112}。另外由TPA中Pd的訊號,更進一步發現在產生皺/平相變的溫度下,當形成(111)平面時,沾附於表面的Pd,其厚度是會稍微減少至約1.2個物理單層(physical monolayer, PML),但在形成皺化{112}面時,Pd的厚度會稍微提升約0.1PML。至於在Pd/Mo/W(111)的系統中,當Mo增加到1PML時,發生相變的溫度會下降約300K,同時相變的緩滯區之寬度也會減少約45K,且相變的存在會越來越不明顯,所以Pd在Mo/W(111)的行為越來越像是Pd/Mo(111)的模式。若鉬的厚度繼續增加,則發生相變的溫度也會隨之下降。 We have used Temperature Programmed Auger (TPA) and Temperature Progammed Low Energy Electron Diffraction (TPLEED) and Temperature Progammed Desorption (TPD) to study the effect of temperature on the surface structure of Pd/W(111) and Pd/Mo/W(111) in an ultrahigh vacuum (UHV) chamber with a base pressure of 1 x 10-10 torr. In Pd/W(111) surfaces, we can get the real-time information of the surface at high temperature and then observe the reversible faceted/planar phase transition. Furthermore, TPA reveals that the apparent coverage of Pd changes across the transition. When the planar (111) surface appears, the wetting layer of Pd slightly reduces to about 1.2PML (physical monolayer). Besides, the coverage of Pd slightly raises about 0.1PML in the faceted surface below the temperature of the phase transition. In the case of Pd/Mo/W(111) surfaces, when the coverage of Mo is added to about 1PML, the temperature of phase transition reduces 300K and the width of the hysteresis also reduces by 45K. In addition, the phase transition becomes less apparent. Thus, the behavior of Pd on Mo/W(111) is closer and closer to that of Pd/Mo(111) as more and more Mo is added. For even thicker Mo layers, surprisingly, the temperature (as well as its width) of the phase transition is lowered with the increased coverage of Mo.
    顯示於類別:[物理研究所] 博碩士論文

    文件中的檔案:

    檔案 大小格式瀏覽次數


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明