中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/74241
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 78818/78818 (100%)
造访人次 : 34474231      在线人数 : 1921
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/74241


    题名: 錫摻雜之高錳矽化物之製備與熱電性質分析;Preparation and Analysis of Thermoelectric Properties of Sn-Doped High Manganese Silicide
    作者: 洪煜柔;Hung, Yu-Jou
    贡献者: 材料科學與工程研究所
    关键词: 高錳矽化物;熱電性質;;不匹配相;Higher manganese silicide;Thermoelectric properties;Tin;Incommensurate phase
    日期: 2017-08-25
    上传时间: 2017-10-27 13:18:28 (UTC+8)
    出版者: 國立中央大學
    摘要: 高錳矽化物(HMS)是極具潛力發展為中溫型發電之P型熱電材料。高錳矽化物為一種不匹配相(Incommensurate phase),目前發現的有四種高錳矽化物之相,分別為Mn4Si7、Mn11Si19、Mn15Si26與Mn27Si47,這四種相皆為螺旋階梯狀排列的晶體結構。
    高錳矽化物之熱電性質通常會藉由摻雜或固溶其他元素改善。本研究採用錫摻雜至高錳矽化物中,使用電弧熔煉與火花電漿燒結的方式,製備多晶摻雜錫之高錳矽化物塊材,並且研究其相組成與微結構。我們選用的錫摻雜比例為0.1at%、0.5at%、1at%和1.5at%。之後對經火花電漿燒結的高錳矽化物塊材進行熱電性質量測,量測的溫度範圍介於323K~773K之間;發現在摻雜量為0.1at%的時候,會有最低的晶格導熱率,並且有最高的ZT值。
    ;Higher manganese silicide (HMS) is considered to be a promising p-type thermoelectric material for use in intermediate-temperature power generation. It is well known that HMS exist as several incommensurable phases such as Mn4Si7, Mn11Si19, Mn15Si26, Mn27Si47, and all of these compounds are Nowotny chimney phases exhibiting tetragonal crystal structure.

    Thermoelectric performance is improved through compositional optimization by doping or substitution. In this work, we prepared polycrytstalline HMS with Sn additions by arc melting and subsequent spark plasma sintering (SPS). The phases, composition, and microstructures of the Sn-doped polycrystalline HMS bulk were investigated. In this study, we select doped-Sn ratio of 0.1at%, 0.5 at%, 1 at%, and 1.5at%. After SPS, we measured the thermoelectric properties of sintered bulk sample from 323K to 773K. We found that the thermal conductivity was significantly improved when the Sn was 0.1at%. The HMS with Sn has the best the ZT is 0.1at%.
    显示于类别:[材料科學與工程研究所 ] 博碩士論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML442检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明