2MW風力機塔架負載及應力分析

NCUIR > Engineering College > Graduate Institute of Mechanical Engineering > Electronic Thesis & Dissertation > Item 987654321/75051

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/75051

Title:	2MW風力機塔架負載及應力分析
Authors:	戴銘伸;Dai, Ming-Shen
Contributors:	機械工程學系
Keywords:	風力機塔架;流場分析;應力分析;Wind Turbine Tower;Flow field analysis;Stress Analysis
Date:	2017-07-27
Issue Date:	2017-10-27 16:18:04 (UTC+8)
Publisher:	國立中央大學
Abstract:	為了提高發電容量滿足用電需求，風力機不斷朝高容量與大型化發展，伴隨而來的是整體質量與運轉負載的增加，進而影響到運轉壽命與開發成本。本研究對Vestas V80-2.0MW機型之風力機塔架進行入力模擬分析及應力計算。使用繪圖軟體SolidWorks繪製V80風力機塔架模型，並利用計算流體力學軟體Fluent對風力機模型進行流場分析，模擬風力機在不同狀態下運轉情形，根據風場情形計算出受力結果，再使用ANSYS Workbench 14.0模擬分析軟體進行不同風速與節距角的穩態分析與各種操作狀況的暫態分析，並討論塔架受負載時的應力分佈。研究結果顯示在不同風速之額定轉速下，葉片皆承受比塔架更大的入力。塔架在正常操作下或IEC 61400-1規範中須滿足的特定風速下均不會造成損壞。在各種極限風速下塔架在中下層法蘭位置迎風面處有最大的拉應力；暫態模擬可知即使在切出風速下緊急關機，塔架之最大等效應力仍遠小於塔架鋼筒的降伏強度。在正常發電額定轉速下時並不會對塔架造成共振的效應。 ;In order to satisfy the needs of electric energy, the capacity of the wind turbine is getting larger. It resulted in a larger weight and a heavier operational load for the wind turbine. The cost will increase and the life cycle will decrease if the wind turbine is operated with a heavy load. This study investigated the stresses of a Vestas V80-2.0MW wind turbine tower. The author applied SolidWorks software to rebuild the V80 wind turbine tower model. Then, the flow field analysis of wind turbine model was carried out by using the Fluent software. We simulate the wind turbine under different conditions of operation, then the results of the fluid analysis were imported into the fluid-structural analysis to find the stress and strain distribution of the wind turbine. The ANSYS software was utilized to study the stresses of the tower under steady and transient operations. The results showed that the blades are subjected to a greater force than the tower at different wind speeds. The tower wouldn’t fail under the normal operation or the special wind speeds which were defined in IEC 61400-1 specification. In different extreme wind speed cases, the tower has the maximum stress at the flange bolts of the middle tower. In the transient simulation, the maximum equivalent stress of the tower is smaller than the yield Strength of the tower in the cut-out wind speed of the emergency shutdown. The operation of the wind turbines doesn’t induce resonance of the tower in rated speed.
Appears in Collections:	[Graduate Institute of Mechanical Engineering] Electronic Thesis & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	208	View/Open

社群 sharing

Loading...