頭戴式顯示裝置之雙穩態環境光調光模組之設計;Design of Bistable Ambient Light Dimming Module for Head-Mounted Display

NCU Institutional Repository > 理學院 > 光電科學研究所 > 博碩士論文 > Item 987654321/76978

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/76978

题名:	頭戴式顯示裝置之雙穩態環境光調光模組之設計;Design of Bistable Ambient Light Dimming Module for Head-Mounted Display
作者:	鄧宇翔;Teng, Yu-Hsiang
贡献者:	光電科學與工程學系
关键词:	頭戴式顯示器;調光模組;擴增實境;混合實境;Head-mounted display;Dimming-module;Augmented reality;Mixed reality
日期:	2018-08-20
上传时间:	2018-08-31 11:55:19 (UTC+8)
出版者:	國立中央大學
摘要:	本文提出四種用於頭戴式顯示裝置的環境光調光模組，藉由電控轉動100µm等級的微結構控制環境光進光量，其微結構單元為雙色小球，一半為吸光材料，另一半為透光材料。調光模組分成穿透態及遮蔽態，切換後不需消耗功率即可維持任一狀態。依據模擬結果，所設計之遮光元件之穿透態穿透率皆可大於50%，遮蔽態穿透率皆可小於10%，對比度可達到10。另外，我們將調光模組模型進行近眼成像的模擬，探討MTF與微結構的繞射效應，針對不同空間頻率對比度的影響歸納出MTF表現較好的型態。;In this thesis, we have proposed four kinds of transmission-adjustable-dimming module for head-mounted see-through displays. The transmittance of ambient light is controlled by electronical-rotating microstructures with size around 100μm. The unit of microstructure is a bichromal bead which is with half opaque and half transparent. There are transparent state and dark state in the dimming modules. The dimming modules do not require power to maintain the state. According to the simulation results, transmittance of the transparent-state can be as high as 50%, the transmittance of the dark-state can be as low as 10%, and the contrast ratio reaches around 10. Finally, we make simulation to evaluate the performance of dimming modules in near-eye imaging system. Through MTF analysis, we can find the influence of the diffraction effect caused by microstructure, and then we can optimize the design.
显示于类别:	[光電科學研究所] 博碩士論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	264	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....