以動態模型分析PQ-DMNA/PMMA製作體積布拉格光柵之光化學反應與開發同調雷射光束合併元件之研究;Using detailed rate equations analysis photochemical reaction of PQ-DMNA/PMMA based volume Bragg grating and manufacturing an optical element of the coherence laser beam combining

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/76988

Title:	以動態模型分析PQ-DMNA/PMMA製作體積布拉格光柵之光化學反應與開發同調雷射光束合併元件之研究;Using detailed rate equations analysis photochemical reaction of PQ-DMNA/PMMA based volume Bragg grating and manufacturing an optical element of the coherence laser beam combining
Authors:	謝裕華;Hsieh, Yu-Hua
Contributors:	光電科學與工程學系
Keywords:	體積布拉格全像光柵;同調雷射光束合併;高分子光敏材料;Volume Bragg grating;Coherence laser beam combining;PQ-DMNA/PMMA
Date:	2018-08-22
Issue Date:	2018-08-31 11:55:42 (UTC+8)
Publisher:	國立中央大學
Abstract:	本研究計畫使用新穎高分子感光材料PQ-DMNA/PMMA製作反射式體積布拉格光柵並利用動態模型模擬PQ與DMNA分子受到雙光束干涉曝光時濃度分布情形。接著使用耦合波方程式計算光柵之繞射效率。藉由改變入射光強度、曝光時間、初始PQ濃度與初始DMNA濃度獲取動態模型中之未知參數且實驗與模擬結果相當吻合。接著使用自製的反射式體積布拉格光柵回饋半導體雷射使得雷射縱向模態達到單縱模輸出且高功率輸出。最後利用全像紀錄方式設計與製作雙顆半導體雷射同調光束合併之元件。使用同調光束合併之元件回饋，不論單顆或雙顆雷射縱向模態輸出皆已達到單縱模輸出且雷射橫向模態也可經由光柵得已修正。但是雙顆雷射耦合輸出只有0.02之效率，推測原因為紀錄與讀取時波前不一致造成。但對於使用全像方式製作雙顆半導體雷射同調光束合併之元件之概念以驗證其可行性。;In this research, N, N-dimethyl-4-nitroniline (DMNA) doped into a familiar hologram material, PQ/PMMA, to form a novel photopolymer, PQ-DMNA/PMMA was used to record reflective-type volume Bragg grating (VBG). Based on several assumes, a detail rate equation was written down and used to analysis the concentration distribution of all molecules in PQ-DMNA/PMMA under exposed two counter-propagating beams. The concentration distributions of PQ and product can used to predict and calculate the diffraction efficiency of PQ-DMNA/PMMA VBG through L-L relation, Fourier series analysis and coupled-mode equation. By changing incident intensity, exposure time, initial concentration of PQ and DMAN, the unknown coefficient of rate equation can be abstained. The results of simulation and experiment are agreed well under continuous exposure. Under interrupt exposure, the empirical function of collision coefficient and lifetime of 3DMNA* were found and proposed a preliminary guessing for whose physical behavior. Then, using a homemade reflective-type VBG feedback a laser diode which is operated on single longitudinal mode and the output power can achieve 150 mW. Finally, an optical element of laser coherence beam combining was used to feedback two laser diodes simultaneously. Two laser diodes both achieved single longitudinal mode operation and the transverse mode were improved down. However, the efficiency of combining output is only 0.01 due to the bad transverse mode of the laser diode.
Appears in Collections:	[光電科學研究所] 博碩士論文

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	348	View/Open

社群 sharing

Loading...