多輸入多輸出正交分頻多工系統之調適性通道估測; An adaptive channel estimation scheme for MIMO OFDM system

NCUIR > College of Electrical Engineering & Computer Science > Graduate Institute of Communication Engineering > Electronic Thesis & Dissertation > Item 987654321/8051

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/8051

Title:	多輸入多輸出正交分頻多工系統之調適性通道估測;An adaptive channel estimation scheme for MIMO OFDM system
Authors:	黃伯廷;Po-Ting Hwang
Contributors:	通訊工程研究所
Keywords:	調適性通道估測;訓練序列;遞迴最小平方演算法;多輸入多輸出正交分頻多工;training sequence;RLS;MIMO OFDM;adaptive channel estimation
Date:	2004-06-14
Issue Date:	2009-09-22 11:16:50 (UTC+8)
Publisher:	國立中央大學圖書館
Abstract:	多輸入及多輸出正交分頻多工系統能在無線通訊中增加傳送資料容量。而對於頻率選擇性的衰退通道下，系統需要知道通道的參數資訊，以便於解回傳送的信號。本論文中，我們提出一種使用最佳訓練序列(training sequence)的調適性遞迴最小平方演算法(RLS)去估測通道，以改進其效能及降低複雜度。它是利用先前我們已經計算出的通道參數去幫助我們估測通道，而不去計算複雜度較高的反矩陣。最後，模擬結果也顯示出在較低的信號雜訊比(SNR)和較小的都卜勒頻率下，有較佳的均方誤差(MSE)和位元錯誤率(BER)。 Multiple-input and multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) systems can be used to increase capacity in wireless communication. For the frequency-selective fading channel in wireband system, it is required to know the knowledge of channel parameters. In this thesis, we propose an adaptive recursive least-square (RLS) algorithm using optimum training sequences for channel estimation to improve the performance and reduce the complexity. Instead of tracking a large matrix inversion, we exploit the information of channel parameters that we have calculated to estimate the channel. Simulation results prove that the mean square error (MSE) performance of channel estimation and bit error rate (BER) are better with low signal- to-noise ratio (SNR) and low Doppler frequency.
Appears in Collections:	[Graduate Institute of Communication Engineering] Electronic Thesis & Dissertation

Files in This Item:

File	Size	Format

社群 sharing

Loading...