中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/8059
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 78728/78728 (100%)
造访人次 : 33542691      在线人数 : 1183
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/8059


    题名: 2.5Gbps雷射二極體驅動電路及2.4/5.2GHz雙頻帶射頻接收器之研究;The Study on 2.5Gbps Laser Driver and 2.4/5.2GHz Dual Band RF Receiver
    作者: 吳怡姍;Yi-Shan Wu
    贡献者: 通訊工程研究所
    关键词: 混頻器;低雜訊放大器;雷射驅動電路;Mixer;Laser Driver;LNA
    日期: 2004-06-29
    上传时间: 2009-09-22 11:17:02 (UTC+8)
    出版者: 國立中央大學圖書館
    摘要: 本論文分為兩個部分,第一個部分為使用UMC 0.18µm CMOS製程研製2.5Gbps雷射二極體驅動電路,所設計之2.5Gbps雷射二極體驅動電路包括:2.5Gbps雷射二極體驅動電路、2.5Gb/s低電壓差動訊號雷射驅動電路;而在第二部分為使用tsmc 0.18µm CMOS製程研製2.4/5.2GHz雙頻射頻接收器,所設計之CMOS 射頻積體電路包括:2.4/5.2GHz雙頻低雜訊放大器、5.2GHz微混頻器。 在第一部分中,所設計之晶片皆採用高頻探針方式進行量測。其中2.5Gbps雷射二極體驅動電路量測結果如下:傳輸速率可達3Gbps、調變電流為34mA、增益約為10dB、輸出返射損耗小於-10dB、最大輸出波形約為0.85Vpp。而在2.5Gb/s低電壓差動訊號雷射驅動電路,其量測結果如下:傳輸速率可達5Gbps、調變電流為3mA、增益約為11.5dB、輸入返射損耗與輸出返射損耗皆小於-10dB、最大輸出波形約為0.1Vpp。 論文的第二部分中,2.4/5.2GHz雙頻低雜訊放大器晶片採用打線至玻璃纖維基板上進行量測,其結果如下:在2.4GHz增益約為5.03dB、輸入返射損耗約為5.68dB、輸出返射損耗約為10.93dB;而在5.2GHz增益約為4.27dB、輸入返射損耗約為5.32dB、輸出返射損耗約為25.41dB。而5.2GHz微混頻器其射頻頻率為5.2GHz、本地振盪頻率為5.19GHz,混頻後可得中頻頻率為10MHz,晶片量測採用高頻探針方式,其結果如下:當本地振盪端功率為-8dBm時,其轉換增益為4.95dB、輸入1dB壓縮點為-8dBm、輸出與輸入三階交互調變交錯點分別約為-5dBm及-3dBm、本地振盪端至射頻端間隔離度約為32.78dBm、本地振盪端至中頻端間隔離度約為26.27dBm、射頻端至中頻端間隔離度約為22.56dBm。 This thesis distribute into two parts. The first part of the thesis is the development of 2.5Gbps laser driver in a UMC 0.18µm CMOS process. The design of 2.5Gbps laser driver circuit includes a 2.5Gbps laser driver and a 2.5Gbps low voltage differential signals laser driver. The second part of the thesis is the development of 2.4/5.2GHz dual-band RF receiver in a tsmc 0.18µm CMOS process. The design of CMOS RF receiver circuit includes a 2.4/5.2GHz dual-band low noise amplifier and 5.2GHz micromixer. The chip is on-chip measurement in first part. The 2.5Gbps laser driver exhibits a data rate of 3Gbps, modulation current of 34mA, gain of 10dB, output return loss smaller than -10dB and maximum output voltage swing of 0.85 Vpp. The 2.5Gbps low voltage differential signals laser driver exhibits a maximum data rate of 5Gbps, modulation current of 3mA, gain of 11.5dB, input and output return loss smaller than -10dB and maximum output voltage swing of 0.1 Vpp. The 2.4/5.2GHz dual-band low noise amplifier is using the method of bonding die to printed circuit board. The 2.4/5.2GHz dual-band low noise amplifier exhibits a linear gain of 5.03dB, input return loss of 5.68dB and output return loss of 10.95dB at 2.4GHz, and a linear gain of 4.27dB, input return loss of 5.32dB and output return loss of 25.41dB at 5.2GHz. The 5.2GHz micromixer is using the method of on-chip. The 5.2GHz micromixer exhibits a conversion gain of 4.95dB, input 1dB compression point of -8dBm, output third-order inter-modulation intercept point of -5dBm, input third-order inter-modulation intercept point of -3dBm, local oscillator to radio frequency isolation of 32.78dB, local oscillator to intermediate frequency isolation of 26.27dB, radio frequency to intermediate frequency isolation of 22.56dB.
    显示于类别:[通訊工程研究所] 博碩士論文

    文件中的档案:

    档案 大小格式浏览次数


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明