無線區域網路之MIMO-OFDM系統設計與電路實現; Design and Implementation of a MIMO-OFDM System for WLANs

NCUIR > College of Electrical Engineering & Computer Science > Graduate Institute of Communication Engineering > Electronic Thesis & Dissertation > Item 987654321/8079

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/8079

Title:	無線區域網路之MIMO-OFDM系統設計與電路實現;Design and Implementation of a MIMO-OFDM System for WLANs
Authors:	彭容彥;Jung-Yen Peng
Contributors:	通訊工程研究所
Keywords:	無線區域網路;通道估測;多輸入多輸出正交分頻多工系統;時空方塊碼;同步;WWiSE.;MIMO-OFDM;STBC;Synchronization;IEEE 802.11n;WLANs;Channel Estimation
Date:	2005-07-06
Issue Date:	2009-09-22 11:17:33 (UTC+8)
Publisher:	國立中央大學圖書館
Abstract:	近年來無線區域網路系統因對於提高資料速率以及降低錯誤率之需求，MIMO-OFDM已成為下一代無線區域網路之技術。本論文根據World Wide Spectrum Efficiency (簡稱WWiSE）聯盟提出之下一代無線區域網路標準 IEEE 802.11n提案，模擬一2X2 MIMO-OFDM系統，並以VHDL設計其硬體架構。在本論文中，系統採用STBC編碼，包含封包偵測、符元時序同步、載波頻率同步、以及通道估測等模組，將先分別介紹其各模組之演算法並探討其效能，而最後整體系統經由電腦模擬結果顯示，所提出之MIMO-OFDM系統相較於傳統之IEEE 802.11a系統，在室內多通道路徑下性能將有顯著之提升。 Because of the demand of higher transmission data rate and better transmission quality, the MIMO-OFDM technology is the trend of the next-generation WLANs. In the thesis, we design a MIMO-OFDM baseband transceiver with two transmit antennas and two receive antennas based on the WWiSE（World Wide Spectrum Efficiency）Alliance’s IEEE 802.11n proposal. Then the architecture is implemented by VHDL. In this thesis, an STBC-OFDM system is described, including the functions of frame detection, symbol timing synchronization, carrier frequency synchronization, and channel estimation. First, each block is discussed individually and the performance is analyzed. Finally, from the system-level simulation results, we show that the proposed MIMO-OFDM receiver offers better performance than the IEEE 802.11a system in an indoor multipath channel.
Appears in Collections:	[Graduate Institute of Communication Engineering] Electronic Thesis & Dissertation

Files in This Item:

File	Size	Format

社群 sharing

Loading...