MIMO-OFDM系統各天線間載波頻率偏差之探討 與收發機硬體實現; Design of MIMO?-OFDM Systems with Different Carrier Frequency offsets on Transmitter Antennas

NCU Institutional Repository > 資訊電機學院 > 通訊工程研究所 > 博碩士論文 > Item 987654321/8166

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/8166

题名:	MIMO-OFDM系統各天線間載波頻率偏差之探討與收發機硬體實現;Design of MIMO?-OFDM Systems with Different Carrier Frequency offsets on Transmitter Antennas
作者:	徐莉雯;Li-Wen Hsu
贡献者:	通訊工程研究所
关键词:	載波頻率;同步;多輸入多輸出;正交分頻多工;Carrier Frequency;Synchronization;OFDM;MIMO
日期:	2006-07-05
上传时间:	2009-09-22 11:19:55 (UTC+8)
出版者:	國立中央大學圖書館
摘要:	將多輸入多輸出(Multiple Input Multiple Output, MIMO)與正交分頻多工技術(Orthogonal frequency division multiplexing, OFDM)結合已被視為下一代無線區域網路技術，此篇論文根據IEEE 802.11n WWise聯盟所提出之草案建構兩根傳送天線及兩根接收天線的MIMO-OFDM系統基頻接收機，整合了封包偵測、符元時序同步、取樣時間偏差更正、載波頻率偏移更正、通道估計，並對載波頻率偏移更正及通道估計部分特別提出新演算法及特殊情況討論，最後，以VHDL語言設計基頻收發機系統，並完成FPGA驗證。 The combination of multiple-input multiple-output (MIMO) and orthogonal frequency division multiplexing (OFDM) is regarded as the next-generation wireless LAN technology. In this paper, we propose a MIMO-OFDM baseband transceiver with two transmit antennas and two receive antennas based on the WWiSE proposal. We devise a solution that integrates frame detection, symbol timing synchronization, sample timing offset synchronization, carrier frequency offset correction, and channel estimation for MIMO-OFDM transmission. With Focus on the part of carrier frequency offset correction, and channel estimation, a new algorithm is proposed in this thesis. Finally, the baseband transceiver is modeled by VHDL and designed with FPGA implementation.
显示于类别:	[通訊工程研究所] 博碩士論文

文件中的档案:

档案	大小	格式	浏览次数

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....