中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/82039
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 42415427      線上人數 : 1627
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/82039


    題名: 立體紙基核酸萃取套組應用於檢測點液態切片之研發;Developments of 3d Paper Based Nucelic Acid Extraction Kit for Point-Of-Care Liquid Biopsy
    作者: 陳文逸
    貢獻者: 國立中央大學化學工程與材料工程學系
    關鍵詞: 核酸萃取;紙基;檢測點;液態切片;套組;Nucleic acid extraction kit;paper based;point of care;liquid biopsy
    日期: 2020-01-13
    上傳時間: 2020-01-13 14:04:41 (UTC+8)
    出版者: 科技部
    摘要: 本計畫是藉由執行中之科技部計畫“液態切片中核酸與二氧化矽表面作用機制探討於生物醫學分子檢測之應用”之執行成果與二氧化矽於核酸萃取機制之暸解,提出一以立體紙基結合二氧化矽的填充與鋪植技術發展一簡易核酸萃取套組於檢查點液態切片之使用的與產品發展。二氧化矽表面提供大量矽氫氧基,藉由環境的酸鹼值與鹽離子種類與濃度等,可以提供不同分子量核酸(核醣核酸或去氧核醣核酸)分子等分離純化機制,配合立體紙張所建構的微流道系統,可能可以提供在檢測點或落後地區核酸萃取以作為執行檢測目標分子時,提供簡易定性篩選套組。所以本計畫將以建立紙基的流道系統研究為主,研究加入二氧化矽微粒填充與鋪植對流道之影響等建立一核酸萃取簡易套組為研發目標。 ;This proposal is based on researches outcomes and knowledge built from the MOST undergoing project “Studies of binding mechanism between nucleic acids with silicasurface of liquid biopsy and its applications in biomolecular diagnosis”. We are proposing to develop a 3D paper based nucleic acid, especially for miRNA, extraction kit for low-resource settings disease/cancer screening. Paper based analytical diagnostics (PAD) has attracted extensive attention due to its low cast, simple fabrication and can be coupled with complex microfluidic function. However, attentions are mostly in diagnostics and for mostly protein/enzyme detection. The high hurdle of purification (sample preparation) of nucleic acids for the paper diagnostics limits and poorly suited for the applications of the PAD in nucleic acids detection. In this project, we propose a 3D paper based miRNA extraction kit. The aim is to develop a purification/extraction kit of miRNA from cell and liquid tissues. We will incorporate exosome purification, protein precipitation, nucleic acids extraction and miRNA enhancement and recovery into the 3D PAD. Antibody for exosome, solvent design and silica powder adsorption are the basic mechanism applied for the 3D fluidic design.
    關聯: 財團法人國家實驗研究院科技政策研究與資訊中心
    顯示於類別:[化學工程與材料工程學系 ] 研究計畫

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML299檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明