中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/84351
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 41678526      線上人數 : 1488
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/84351


    題名: 熱處理對Ti-6Al-4V真空硬銲件微觀結構及機械性質之影響
    作者: 廖奕誠;Liao, Yi-Cheng
    貢獻者: 機械工程學系
    關鍵詞: 鈦合金;Ti-6Al-4V;真空硬銲;銲後熱處理;Ti-15Cu-15Ni;Titanium Alloy;Ti-6Al-4V;Vacuum Brazing;Post Weld Heat Treatment;Ti-15Cu-15Ni
    日期: 2020-07-30
    上傳時間: 2020-09-02 19:09:31 (UTC+8)
    出版者: 國立中央大學
    摘要: 本研究採用Ti-6Al-4V鈦合金為實驗材料,以對接銲接方式進行真空硬銲,其中利用鈦基填料Ti-15Cu-15Ni做為填充金屬。母材Ti-6Al-4V經過真空硬銲後導致機械性質下降,為了改善母材機械性質,常利用固溶時效熱處理,提升母材強度,因此本研究將探討真空硬銲後進行固溶及時效熱處理,探討銲後經不同條件之固溶及時效熱處理對於銲道與母材微觀結構及機械性質的影響。
    研究結果顯示,母材於銲後因產生費德曼組織導致強度下降。銲後經固溶960℃ x 60 min與時效482℃ x 2 hr可消除母材之費德曼組織,並析出強化相,獲得最佳抗拉強度;銲道則因介金屬化合物微細化,獲得優異之接合強度。銲後採用高溫時效(固溶960℃ x 20 min及時效704℃ x 2 hr),母材會產生過時效軟化,銲道經過長時間高溫時效後介金屬化合物粗大化,導致銲道接合強度下降,但因晶粒粗大化而改善韌性,並獲得較高衝擊能。
    ;In this study, Ti-6Al-4V titanium alloy was the experimental material, Ti-15Cu-15Ni was the filler metal, and butt welding was performed by vacuum brazing. The mechanical properties of the base metal Ti-6Al-4V was reduced after vacuum brazing. In order to improve the mechanical properties of the base material. The post weld heat treatment was adopted to improve the microstructures and mechanical properties of weld bead and base metal.
    The results showed that the strength of the base metal was reduced due to the Widmanstatten structure after vacuum brazing. The best tensile strength of the weldment was obtained by solution at 960℃ x 60 min and aging at 482℃ x 2 hr. After the above post weld heat treatment process, the Widmanstatten structure of base metal was eliminated and the strengthened phase precipitated. Also, the weld bead was refined by the intermetallic compound, and resulted in excellent bonding strength. If the aging temperature was too high (solution at 960℃ x 20 min and aging at 704℃ x 2 hr), the base metal was over-aged and softened. The coarsened intermetallic compound in the weld bead led to decreasing in the strength and increasing in the impact energy.
    顯示於類別:[機械工程研究所] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML139檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明