單源熱蒸鍍製備藍光與綠光鈣鈦礦薄膜之研究;The Characteristic Analysis of Single-source Vacuum Deposition the Perovskite Blue-/Green Emitting Thin Film

NCU Institutional Repository > 工學院 > 能源工程研究所 > 博碩士論文 > Item 987654321/85029

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/85029

題名:	單源熱蒸鍍製備藍光與綠光鈣鈦礦薄膜之研究;The Characteristic Analysis of Single-source Vacuum Deposition the Perovskite Blue-/Green Emitting Thin Film
作者:	張嘉真;Zheng, Jia-Zhen
貢獻者:	能源工程研究所
關鍵詞:	單源熱蒸鍍;鈣鈦礦薄膜;鈣鈦礦;Single-source Vacuum Deposition;Perovskite Thin Film;Perovskite
日期:	2021-01-27
上傳時間:	2021-03-18 17:24:17 (UTC+8)
出版者:	國立中央大學
摘要:	全無機金屬鹵化物鈣鈦礦 (All-inorganic Pervoskite) 晶體材料為近幾年科學家們熱門著重研究的新興光電材料，歸因於材料本身不但具有優異的光吸收係數、優秀的電子遷移率、色純度高以及可調控之發光波長和能帶結構與能隙值、富含多元的材料形貌(由零維結構至三維結構) 等顯著特性，使得鈣鈦礦晶體材料在太陽能電池、量子點及發光二極體等領域應用具有極大的發展潛能與優勢。本論文主要探討在單源熱蒸鍍製程中分別以兩種不同的蒸鍍製程蒸鍍不同厚度的薄膜，藉由石英振盪式膜厚監視器 (Deposition monitor) 進行膜厚監控，比較全無機金屬鹵化物鈣鈦礦 CsPbCl3 和 CsPbBr3 粉末與原料粉 CsCl、CsBr、PbCl2、PbBr2 蒸鍍之薄膜的成膜均勻性及發光情形，及進一步探討 CsPbCl3 在兩種不同蒸鍍製程不同的光學性質，再藉由 XRD、TEM 分析薄膜的晶體結構，佐以 UV-Vis、PL 分析各薄膜蒸鍍參數的光學性質。綜合多樣分析結果，倘若蒸鍍製程從低溫開鍍至溫度 390℃，原料粉所蒸鍍之薄膜照 UV 燈皆無明顯發光，相較於全無機金屬鹵化物鈣鈦礦 CsPbCl3 和 CsPbBr3 隨蒸鍍膜厚的增加，照 UV 燈後有明顯不同波長的發光趨勢出現；若以高溫 390℃ 開鍍鈣鈦礦材料相比原料粉，有較為均勻之成膜和優異顯著的光學性質。本研究以單源熱蒸鍍全無機金屬鹵化物鈣鈦礦 CsPbCl3 和 CsPbBr3 薄膜，再進行不同莫耳比例的摻雜，完成 CsPbCl3 (407nm) 至 CsPbBr3 (527nm)一系列可見光可調控波長及能帶位置，而當CsPbCl3：CsPbBr3 莫耳比為2：1 時PL 發射波長為453nm 處，符合學術界450nm 處至460nm 處的藍色發光研究，可利用此波長作為將來藍光LED 之應用。;Compares with solution processing, perovskite film prepared by single-source vacuum deposition were completely continuous and smooth. In this study, We turned our attention to single-source thermal evaporation to deposit all-inorganic perovskite film. To improve the quality of the perovskite thin film, we mixed CsCl and PbCl2 powder in the crucible to compare with CsPbCl3, CsPbBr3 powder. Therefore, we discuss the perovskite film in two different evaporation process : Start thermal evaporation from room temperature and Thermal evaporation begin at temperature390℃. In the result, we found the perovskite film by Start thermal evaporation from room temperature process content more Pb in the thin film, and existed derivative CsPb2Cl5 phase. We used the XRD, TEM and UV-Vis to analyze perovskite film of different parameters. We doped CsPbBr3 in CsPbCl3 film and adjusted the different ratio of Br to tunable emission spectrum during the different evaporation process. Finally, we fabricated high quality CsPbCl3 and CsPbBr3 film by thermal evaporation begins at temperature 390℃ and optimized in one batch, the corresponding PL evolution was investigated. When the CsPbCl3 and CsPbBr3 molar ratio is 2:1, the PL emission wavelength is at 452nm. This wavelength in line with the academic research of blue luminescence from 450nm to 460nm. This wavelength can be used as a blue LED application and compatible strategy for future LED industrialization.
顯示於類別:	[能源工程研究所 ] 博碩士論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	147	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing

資料載入中.....