中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/86005
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 78937/78937 (100%)
造訪人次 : 39359307      線上人數 : 459
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/86005


    題名: 奈米精密度雷射測距儀量測與比較吉他音色與音量之研究;Measurement and comparison of timbre and sound level of guitars using displacement sensor with nanometer precision
    作者: 蘇冠丞;Su, Kuan-Cheng
    貢獻者: 光電科學與工程學系
    關鍵詞: 古典吉他;雷射測距儀;聲音頻譜;振動頻譜分析;音色;音量;止絃法;跳絃法;classical guitar;laser displacement sensor;acoustic spectrum;timbre;apoyando;tirando;sound level
    日期: 2021-08-20
    上傳時間: 2021-12-07 11:51:47 (UTC+8)
    出版者: 國立中央大學
    摘要: 樂器大多是以基音與泛音組合的聲音作為不同樂器音色的區分。每個樂器例如:吉他,都有自己的基音和泛音組合,造成吉他獨一無二的音色。
    在本研究中,我們以古典吉他為標的,探討古典吉他Apoyando與Tirando的彈奏法的音色不同的原因。本研究由文獻得知,Apoyando的彈奏法較會引起垂直於吉他面板的絃的振動型態。Tirando的彈奏法較會引起水平於吉他面板的絃的振動型態。我們透過雷射測距儀,其位移量測精密度為30nm,取樣頻率為20kHz,量測吉他面板所產生的振動,並獲得其振動頻譜,可分析此兩種激發絃音方法在音色上的不同。我們發現,垂直於吉他面板的絃的振動型態(Apoyando)可引起基頻音的較大的振幅。水平於吉他面板的絃的振動型態(Tirando),會引起較大的諧振音的振幅。如此造成兩種彈奏法音色上的不同。
    吉他的結構是由音箱的形狀、木板種類、木板厚度、力木形狀等因素所影響。這些由音箱結構所決定的音色,是吉他音色的另一個來源。本論文提出於吉他音箱內部產生聲音脈衝的方法,用於量測在無絃狀態的吉他的基本音色。當演奏吉他時,吉他音箱的音色,與上述垂直或水平於面板的撥絃所生成的絃的音色的合唱,形成了吉他的音色。因此本論文的量測法,可分別獨立地針對音箱與完整的吉他分別分析其振動頻譜。
    在本論文中,我們使用雷射測距儀對兩把吉他進行量測。其中一把為本實驗室自製之手工吉他,面板為Sitka Spruce雲杉,側板以及背板使用香絲焦檀。另一把吉他為1997年製西班牙 Jos? Ramirez 3E,面板是Cedar,側板與背板是使用Rosewood。分別分析兩把古典吉他,以垂直或水平於面板的撥絃的吉他頻譜。也分析在無絃的狀態,音箱內聲音脈衝所造成的吉他振動頻譜。我們使用兩把吉他的頻譜,進行頻譜相似度與聲能比的計算。可以得到兩把吉他在音色上的相似度,與音量的倍率。這些數據可以給製琴師力
    木與音箱結構修改的依據、樂器販售公司與吉他彈奏者性價比估計的依據。對於樂器的定價將可能有具體的幫助。
    本論文所提出所使用的雷射測距儀與聲音脈衝量測法,均為非接觸式的方法。對於樂器的不會造成任何損傷。比過去文獻所提出的敲擊與加速規的量測法,提高了許多量測的安全性。本研究所提出的量測法的量測結果,可定量的比較各樂器的音色與音量。
    ;The combination of harmonics with different characteristics of the formants forms the timbre of the instruments. For the classical guitars, the timbre may be determined by the types of woods, the bracing and the shape of the body as well as the material of the string and the plucking condition to the strings, etc. The basic plucking methods of the classical guitars are Apoyando and Tirando which induce the perpendicular and parallel vibration of the strings to the soundboard. In this work, the timbres of the plucking method Apoyando and Tirando are investigated by the laser displacement sensor. The vibration spectrum of the soundboard can be obtained with a resolution of displacement of 30nm. The sampling frequency of the laser displacement sensor is 20kHz. The results show that the intensity of the fundamental notes for the perpendicular plucking is stronger than that for the parallel plucking. However, the harmonics for the perpendicular plucking is lower and that for the parallel plucking. This effet induces the timbre difference between Apoyando and Tirando.
    The vibration of the soundboard for the guitar without sting is measured using the pulsed acoustic source positioned inside the body. The acoustic spectrum corresponding to the timbre of the pure body without sting can be acquired. As one plays the guitar, the chorus of the timbre of the pure body and that induced by stings forms the timbre of the guitar. In this study, we will independently study the timbres.
    One home-made classical guitar and a 1997 Spanish Jos? Ramirez 3E guitar are measured and compared in this work. We analyze the spectra of the two guitars for the perpendicular and parallel sting plucking to the soundboard. The similarity of timbre is calculated by the cross-correlation of the spectra for the two guitars. The sound energy of the two guitars is also compared.
    ?
    In this work, we propose a novel and non-contact measurement method using the laser displacement sensor and pulsed acoustic source. The process prevents from the damage that might be induced by tapping and contact measurement using accelerometer. Our results can be used to compare quantitatively the timbre and the sound level of the guitars. This quantitative analysis might be helpful for luthiers to undertand the relation between the bracing and the timbres, for the guitar shop to price of the guitars, and for the comstomers to evaluate the price quality ratio of the guitars.
    顯示於類別:[光電科學研究所] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML118檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明