逆高斯過程之完整貝氏衰變分析;A Complete Bayesian Degradation Analysis under Inverse Gaussian Processes

NCU Institutional Repository > 理學院 > 統計研究所 > 博碩士論文 > Item 987654321/86321

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/86321

題名:	逆高斯過程之完整貝氏衰變分析;A Complete Bayesian Degradation Analysis under Inverse Gaussian Processes
作者:	古立丞;Ku, Li-Chen
貢獻者:	統計研究所
關鍵詞:	階層貝氏;馬可夫鏈蒙地卡羅;逆高斯過程;後驗預測 p -值;適合度檢定;DIC;預測分布;hierarchical Bayesian;MCMC;inverse Gaussian process;posterior predictive p-value;goodness of fit;DIC;predictive distribution
日期:	2021-08-10
上傳時間:	2021-12-07 12:32:20 (UTC+8)
出版者:	國立中央大學
摘要:	衰變分析包含兩個階段，首先對收集到的與產品失效時間相關之品質特徵值的衰變資料建構統計模型，而由於不同產品間可能存在差異性，衍伸出具隨機效應的衰變模型。其次根據選取的衰變模型推估衰變路徑首次達失效門檻值之時間，進而得失效時間分布之統計推論。另一方面，當樣本數少時，工程師在製程或試驗中對產品特徵與失效機制有深入的專業知識和經驗，因而融合先驗資訊與觀測資料的貝氏方法是很自然的選擇。文獻上關於衰變試驗的貝氏可靠度推論，多止於衰變路徑之建模與分析，在資料配適和模型選擇上鮮少有完備的貝氏論述;關於後續之失效時間的推論則多由衰變模型模擬而得，遑論探討失效時間模型之適合度檢定等重要議題。本文針對具單調性的衰變路徑資料，以具共軛先驗分布之逆高斯過程進行完整的貝氏可靠度分析。對衰變資料模型，除貝氏選模外，亦以貝氏適合度檢定，確認衰變資料的適切模型;繼而推得產品失效時間之貝氏預測分布及相關推論，同時再就貝氏適合度檢定驗證失效時間模型之合理性，提供完整的貝氏分析。最後以四筆實際資料驗證貝氏方法的可行性並與古典統計方法進行比較。;Degradation analysis consists of two parts. First, a statistical model is constructed for the observations of a quality characteristic related to the failure time of the products. Possible unit to unit variation reflected in the decay rate and/or variability of degradation paths leads to random effects in the degradation models. Secondly, the lifetime inference of the product is derived based on the first passage time to a failure threshold of the selected degradation model. On the other hand, in particular for small sample sizes, Bayesian analysis incorporated with valuable prior information collected from expert opinion or experience, is a useful approach. However, most Bayesian research focuses more on analyzing the degradation data than deriving the lifetime inference. This thesis aims on a complete Bayesian approach not only to formulate the degradation model but also to deduce the consequent lifetime inference by using the Bayesian predictive analysis. Conjugate structure and hierarchical modelling are considered based on the inverse Gaussian processes for monotonic data. Bayesian model selection criteria are used to select the best degradation model and Bayesian goodness of fit is employed for model checking of the lifetime distribution. Four different examples are analyzed via the proposed approach and compared to the classical method.
顯示於類別:	[統計研究所] 博碩士論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	120	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing

資料載入中.....