中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/89074
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 80990/80990 (100%)
造访人次 : 42141913      在线人数 : 923
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/89074


    题名: 鋼筋混凝土構件之鋼筋握裹性能試驗研究;Experimental Investigation on the Bond Performance of Rebar in Reinforced Concrete
    作者: 周秉憶;CHOU, BING-YI
    贡献者: 土木工程學系
    关键词: 直線伸展長度;高強度鋼筋;握裹性能;節高;節距;劈裂指數;Develop length;High-Strength deformed bars;Bonding performers;Rib heigh;Rib space;Spilling index
    日期: 2022-09-23
    上传时间: 2022-10-04 10:50:42 (UTC+8)
    出版者: 國立中央大學
    摘要: 本研究為探討不同節型鋼筋於混凝土中之握裹行為。共製作30 組梁端鋼筋錨定試體,採用梁端偏心拉拔之試驗形式,模擬具有適當橫向圍束竹節與光面鋼筋之受撓構件中鋼筋的直線握裹行為,探討鋼筋在臨界斷面處發展斷筋伸展長度下,其握裹應力與不同鋼筋節型間的關係。過去曾對於竹節鋼筋與混凝土之握裹性能及螺紋節鋼筋與混凝土之握裹性能進行研究,針對不同鋼筋節形與混凝土握裹行為之相關研究較少。本研究考慮在不同主筋節形、主筋脊位置、箍筋強度、混凝土強度、包含混凝土保護層及橫向鋼筋圍束的劈裂指數(超過上限值2.5)及鋼筋表面之幾何形狀指標Rr(節高與節距之比值)下,鋼筋與混凝土間的握裹行為。;The purpose of this study is to investigate the gripping behavior of different nodal types of steel bars in concrete. A total of 30 sets of beam-end reinforcement anchoring specimens were made, and the beam-end eccentric pulling test was used to simulate the straight-line wrapping behavior of steel bars in a flexural member with appropriate transverse confinement bamboo joints and smooth steel bars. The relationship between the wrapping stress and the different types of steel bars under the extension length of the broken bar developed at the surface. In the past, there have been studies on the gripping properties of slub-jointed steel bars and concrete and the gripping properties of threaded-section steel bars and concrete, but there are few studies related to different shapes of steel bars and the gripping behavior of concrete. In this study, different main bar nodal shapes, main bar ridge positions, stirrup strength, concrete strength, splitting index (over the upper limit of 2.5) including concrete cover and transverse reinforcement bars, and the geometric shape index Rr of the steel bar surface were considered. The ratio of height to pitch), the grip behavior between steel and concrete.
    显示于类别:[土木工程研究所] 博碩士論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML108检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明