石墨烯與氮化物於金屬多孔材之抗蝕特性與高溫質子交換膜燃料電池應用之研究;Research on the Corrosion Resistance Characteristics of Graphene and Nitride Coatings on the Surface of Metal Porous Materials and Their Applications in High-Temperature Proton Exchange Membrane Fuel Cells

NCU Institutional Repository > 工學院 > 能源工程研究所 > 博碩士論文 > Item 987654321/92623

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/92623

題名:	石墨烯與氮化物於金屬多孔材之抗蝕特性與高溫質子交換膜燃料電池應用之研究;Research on the Corrosion Resistance Characteristics of Graphene and Nitride Coatings on the Surface of Metal Porous Materials and Their Applications in High-Temperature Proton Exchange Membrane Fuel Cells
作者:	吳冠穎;Wu, Guan-Ying
貢獻者:	能源工程研究所
關鍵詞:	高溫質子交換膜燃料電池;磷酸;腐蝕;石墨烯;金屬多孔材
日期:	2023-07-19
上傳時間:	2024-09-19 15:57:21 (UTC+8)
出版者:	國立中央大學
摘要:	中文摘要本研究使用金屬多孔材為質子交換膜燃料電池之流場，金屬多孔材具有高孔隙率、質量輕及導電性佳之特性，作為燃料電池流道與傳統流道相比不具遮蔽效應。由於高溫燃料電池運作時內部為酸性之環境，會侵蝕流道進而影響燃料電池壽命，為了防止磷酸水溶液腐蝕金屬多孔材而釋出金屬離子毒化膜電極組中的觸媒，需透過表面鍍層處理提升金屬多孔材之抗腐蝕性、導電性與疏水性等。本研究使用石墨烯、氮化鈦、氮化鋯及氮化鉻作為抗腐蝕鍍層，透過表面微觀結構、接觸角與腐蝕測試分析材料性質，並組成單電池分析性能表現。腐蝕極化結果顯示石墨烯鍍層於模擬高溫燃料電池環境之抗蝕能力優於其它鍍層，石墨烯鍍層之多孔材比無鍍層之多孔材腐蝕電流大幅降低約58%，比常見氮化鈦鍍層降低約21%。且腐蝕量測前後之表面微結構型態分析表明，石墨烯鍍層顯示出更好的抗腐蝕穩定性。以石墨烯鍍層鎳多孔材組裝的PEMFC單電池，於180 oC下定電流在400 mA/cm2量測長時間之耐久性，石墨烯鍍層較無鍍層發泡材之燃料電池之電壓衰退率減少48.8%。藉由石墨烯之高電導率、機械強度等優勢，應用於高溫質子交換膜燃料電池，可提高電池之耐久性及穩定性。 ;Abstract This study uses metal porous materials as the flow field for high-temperature proton exchange membrane fuel cells (HT-PEMFCs). Metal porous materials exhibit characteristics such as high porosity, light weight, and excellent conductivity, which make them advantageous compared to traditional flow channels, as they can eliminate shielding effect. During the operation of HT-PEMFCs, the internal environment is acidic, which can corrode the metal flow channels and thereby affect the durability of the fuel cells. To prevent corrosion of metal porous materials by leakage phosphoric acid solutions from proton exchange membrane, it is necessary to enhance the corrosion resistance, conductivity, and hydrophobicity of the porous metal materials through surface coating treatments. In this study, we used graphene, titanium nitride, zirconium nitride, and chromium nitride as anti-corrosion coatings. We analyzed the properties of these materials through surface morphology observation, contact angle measurements, and corrosion tests, and incorporated them into single cells to analyze their performance. The corrosion polarization results show that the corrosion resistance of the graphene coating in a simulated HT-PEMFC environment is superior to other coatings. The corrosion current of the graphene-coated porous material is significantly reduced by approximately 58% compared to the pristine porous material and reduced by approximately 21% compared to the commonly used titanium nitride coating. Analysis of the microstructure before and after corrosion testing reveals that the graphene coating exhibits better corrosion resistance stability. In a HT-PEMFC single cell assembled with a graphene-coated nickel porous material, the fuel cell demonstrated long-term durability at a constant current of 400 mA/cm2 at 180 °C. The voltage decay rate of the fuel cell with the graphene coating was 48.8% less than that of the pristine metal porous material.
顯示於類別:	[能源工程研究所 ] 博碩士論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	9	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing

資料載入中.....