中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/9417
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 78852/78852 (100%)
造访人次 : 37848815      在线人数 : 741
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/9417


    题名: 在無線感測網路中分散式適應傳輸能量控制演算法;Distributed Adaptive Transmission Power Control Algorithm for Wireless Sensor Networks
    作者: 鄭燿堃;Yao-kun Cheng
    贡献者: 資訊工程研究所
    关键词: 能量消耗;能量控制;能量保存;無線感測網路;Energy consumption;power control;power saving;wireless sensor network
    日期: 2007-09-11
    上传时间: 2009-09-22 11:47:19 (UTC+8)
    出版者: 國立中央大學圖書館
    摘要: 在無線感測網路 (Wireless sensor networks)中電池能量的消耗決定了感測器可以工作的時間,因此控制能量的消耗在無線感測的研究上是一個重要的議題。在此論文中,我們提出了一個分散式傳輸能量的控制的演算法,此演算法不只是延長了感測器工作的時間,也維持了傳輸封包的成功率,除此以外也可以降低傳輸時封包碰撞的機率,在設計演算法之前,我們做了許多的實驗來發現在不同的傳送能量上影響封包成功率的因素來設計演算法。在演算法中感測器使用訊號強度指標(Received Signal Strength Indicator)與連結品質指標(Link Quality Indicator) 來決定對於鄰居感測器的傳送能量。演算法中的參數皆由實驗的結果來得出最佳的設定,由於環境是隨著時間的變化,以至於固定的傳送能量無法去適應環境的變化,因此在演算法中感應器可以動態的根據環境的變化來調整傳送封包的能量,來達到保證封包的成功率以及減少感測器能量的消耗,在最後實驗的結果顯示分散式能量控制演算法可以依據環境的變化來調整傳送的能量以及保證封包的成功率,在能量的節省上也有不錯的表現。 In wireless sensor networks, senor nodes’ lifetime depend on their battery energy. Thus, the power saving on sensor nodes is a critical issue in wireless sensor networks. In this paper, we proposed a distributed adaptive transmission power control algorithm which cannot only prolong the lifetime of sensor nodes by saving the energy consumption but enhance the performance of packet delivery ratio. Besides, it can also reduce the interference between transmitting nodes. Before designing our algorithm, we firstly investigated the impact of link quality when utilizing different transmission power by analyzing lots of experimental data, and then design our algorithm based on those experimental results. In our algorithm, each node utilizes the RSSI (Received Signal Strength Indicator) value and LQI (Link Quality Indicator) value of the radio to determine the appropriate transmission power for its neighbors. Our algorithm can dynamically adjust the transmission power with the environment change. All of our experiments are implemented on the MICAz platform. The experimental results show that our algorithm can save power energy and guarantee a good link quality for each pair of communications.
    显示于类别:[資訊工程研究所] 博碩士論文

    文件中的档案:

    档案 大小格式浏览次数


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明