電極公轉繞圓電化學放電切割加工石英晶圓之研究;Research on quartz wafer cutting by using Electrochemical Discharge Machining with circumferentially arranged electrodes revolution

NCU Institutional Repository > 工學院 > 機械工程研究所 > 博碩士論文 > Item 987654321/95905

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/95905

题名:	電極公轉繞圓電化學放電切割加工石英晶圓之研究;Research on quartz wafer cutting by using Electrochemical Discharge Machining with circumferentially arranged electrodes revolution
作者:	蔡侑倫;Tsai, Yu-Lun
贡献者:	機械工程學系
关键词:	電化學放電加工;石英晶圓;電極公轉繞圓;Electrochemical Discharge;Quartz Wafer;circumferentially arranged electrodes revolution
日期:	2024-07-26
上传时间:	2024-10-09 17:23:06 (UTC+8)
出版者:	國立中央大學
摘要:	目前常被用於切割石英晶圓的加工方式主要有傳統機械加工及半導體微影製程，而於傳統機械加工中，容易於石英晶圓邊緣處產生微裂紋，若採用半導體微影製程進行加工，其加工過程費時且成本昂貴，且會對環境造成汙染之風險。本研究採用直徑為150 m的碳化鎢螺旋電極作為工具電極，進行電極公轉繞圓電化學放電切割加工石英晶圓之研究，實驗以單因子參數實驗進行，探討各項加工參數如工作電壓、脈衝週期、Z軸進給速率及衝擊係數等對於石英晶圓之各種加工品質特性的影響，加工品質特性包含了槽寬、槽深、槽道表面形貌及螺旋工具電極表面形貌。此外，於各項單因子參數實驗後，會選用較為可行之參數，進行石英晶圓直徑8 mm之整圓切穿測試，以獲得較佳加工參數組合。採用電極公轉繞圓的方式，以電化學放電切割加工石英晶圓，不僅能避免長時間於同一點的火花放電，而且能透過公轉繞圓的方式，使新鮮的電解液能夠流動至加工區域，因此所切割完成之石英晶圓側壁較為平滑及未有裂紋生成，而且亦可大幅縮短加工時間，增進加工效率。依據各項參數實驗及整圓切穿測試結果，可得到本研究較適合切割石英晶圓之最佳參數組合為工作電壓48 V、脈衝週期10 s、Z軸進給速率1/5 m/s及衝擊係數50 %，加工時間相較於電極自轉CNC繞圓方式切割加工時間減少了83 %。 ;Currently, the common processing methods for cutting quartz wafers mainly include traditional machining and semiconductor lithography. In traditional machining, micro-cracks are likely to occur at the edges of quartz wafers. If the semiconductor lithography is used for processing, the process is time-consuming and expensive, and may pollute the environment. In this study, a tungsten carbide spiral electrode in diameter of 150 µm was used as the tool electrode to study the quartz wafer cutting by using electrochemical discharge machining with circumferentially arranged electrodes revolution. The experiments were conducted in single-factor parameter experiments to discuss the influence of various processing parameters such as voltage, pulse period, Z axis feed rate and duty factor on various processing quality characteristics of quartz wafers. The processing quality characteristics include slot width, slot depth, channel surface morphology and spiral tool electrode surface morphology. In addition, relative feasible parameters were selected after each single-factor parameter experiment to test full-circle cut through with a diameter of 8 mm on the quartz wafer, so as to obtain a better combination of processing parameters. The circumferentially arranged electrodes revolution is used, and the quartz wafer is cut by using electrochemical discharge, the spark discharge at the same point in a long period of time can be avoided, and the fresh electrolyte can flow to the processing area through the revolution round the circle, so the sidewall of the cut quartz wafer is relatively smooth and free of cracks, and the processing time can be greatly shortened and the processing efficiency can be improved. According to various parameter experiments and full-circle cut through test results, the optimal parameter combination for cutting quartz wafers in this study consists of voltage 48 V, pulse period 10 µs, Z-axis feed rate 1/5 µm/s and duty factor 50 %. The cutting time is reduced by 83% compared with the CNC circle path with electrode rotation.
显示于类别:	[機械工程研究所] 博碩士論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	20	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....