中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/95951
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 40306015      線上人數 : 239
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/95951


    題名: 置入物形狀對儲槽中顆粒排放行為之影響;The Influence of Obstacle Shape on Particle Discharge Behavior in a Silo
    作者: 約新;Yosin, Khafidz Anshori
    貢獻者: 機械工程學系
    關鍵詞: 筒倉;阻塞;流量;silo;clogging;flow rate
    日期: 2024-08-14
    上傳時間: 2024-10-09 17:26:14 (UTC+8)
    出版者: 國立中央大學
    摘要: 本研究的目的是探討在筒倉中插入多種形狀障礙物對顆粒流速的影響。隨著堵塞現象可能對食品和藥品的儲存造成負面影響,這個問題尤其需要認真對待。保持顆粒流動並減少阻塞時間,是提高工作效率的關鍵。我們通過實驗研究了三角形、正方形、七邊形和圓形障礙物在二維平底筒倉中對流速的影響。在這些情況下,我們考慮了障礙物的旋轉速度變化和垂直軸上位置的變化。研究發現,與其他形狀相比,三角形障礙物對顆粒流速影響最大,表現出最快的流速。此外,旋轉速度也對流速有顯著影響,低速度下的流速最慢,而中速度和高速度則表現出相似且較快的流量。障礙物在垂直軸上的位置對流速同樣有重要影響,障礙物越靠近出口,堵塞現象越明顯,因為這會影響顆粒在出口通道中的流動。這些研究結果有助於理解和優化筒倉中顆粒流動的條件,從而提高產業儲存和運輸過程中的效率和可靠性。;The objective this study to investigate the effect of inserting obstacles that have several shapes on the particle flow rate in the silo. The flow rate that occurs with clogging has a negative impact on the storage of foodstuffs and medicines. Therefore, the impact of the clogging problem must be taken seriously, the particle flow rate must always flow and the clogging time must be reduced to increase efficiency in work. We present experimental results regarding the effect of triangular, square, heptagon and circle obstacles on particle flow rates in 2D flat bottom silos. In this case, we add variations in rotational speed differences and variations in obstacle position on the vertical axis. We found that the flow rate in the triangle has the fastest flow rate compared to the flow rate in other shape of obstacles. Rotational speed also affects flow rate with the result that lowest rotational speed has the slowest flow rate. Meanwhile, medium and high rotational speed have similar and constant flow rates. The placement of obstacles on the vertical axis has an influence on the flow rate. The farther the object is from the outlet, the more clogging will disappear because the more particles can remain in the outlet lane.
    顯示於類別:[機械工程研究所] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML11檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明