中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/962
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 41759088      線上人數 : 2082
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/962


    題名: 結合光達資料與數位空照影像重建三維建物模型;Fusion of LIDAR Data and Aerial Imagery for Building Reconstruction
    作者: 賴彥中;Yen-Chung Lai
    貢獻者: 土木工程研究所
    關鍵詞: 光達;數位空照影像;房屋偵測;房屋重建;房屋模型;LIDAR;aerial image;building detection;building reconstruction;building model
    日期: 2004-06-07
    上傳時間: 2009-09-18 17:16:38 (UTC+8)
    出版者: 國立中央大學圖書館
    摘要: 本研究從資訊融合角度出發,結合光達資料及數位化彩色空照影像進行三維建物模型之重建。本研究分成兩個部分,第一部份是房屋區塊偵測,第二部份是房屋模型重建。 房屋區塊偵測部分,依原始光達資料之高度資訊,判別出地上物區域。利用空照影像之色彩分析,將地上物區域之樹木部分去除。殘餘之區塊設定一面積門檻,將面積過小之區塊濾除。之後進行區塊形狀以及表面分析,去除不合理之區塊,房屋區塊即建立完成。 房屋模型重建部分,首先進行光達資料前處理,預估出概略屋緣位置,同時萃取出位於屋頂平面之光達點。將預估之概略屋緣位置投影至空照影像上,設定工作區域,在此區域內進行精確之直線偵測。所得之直線線段組合成房屋之候選屋頂面,搭配前處理中萃取出之光達點進行屋頂面之判別與高度計算後,投影回物空間獲得三維之屋頂面,最終結合SMS方法建立房屋模型。研究中使用新竹科學園區之光達資料及大比例尺數位空照影像進行測試。 From the viewpoint of data fusion, we integrate LIDAR data and digital aerial image to perform 3D building modeling in this study. The proposed scheme comprises two major parts: (1) building block detection and (2) building model reconstruction. In the first step, height differences from LIDAR data are analyzed to detect the above ground areas. Color analysis is then performed for the exclusion of tree areas. Remaining regions are restricted by area threshold. After the refinement by shape and texture analysis, building blocks are established. In the second step, we analyze the height information of LIDAR raw data to estimate the approximate roof-edges and extract the LIDAR points located on the rooftop. Based on the approximate roof-edges, accurate 2D edges are calculated in aerial image and then transformed into candidate roof-planes. Combined with the extracted LIDAR points, the correct roof-planes are selected and projected back to object space as 3D roof-planes. At last, a patented method SMS (Split-Merge-Shape) is employed to generate building models using the 3D roof-planes. LIDAR data and large scale aerial image in Hsin-Chu Science-based Industrial Park of north Taiwan were used in the test.
    顯示於類別:[土木工程研究所] 博碩士論文

    文件中的檔案:

    檔案 大小格式瀏覽次數


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明