中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/9704
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 78728/78728 (100%)
造访人次 : 33561381      在线人数 : 780
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/9704


    题名: 具有適應性終端電阻及預先增強器之8Gbps串列連結傳送器;8Gbps Serial Link Transmitter with Adaptive Termination Resistors and Pre-Emphasis
    作者: 陳志寧;Chih-Ning Chen
    贡献者: 電機工程研究所
    关键词: 預先增強傳送器;平行化打散器;終端電阻;Transmitter with Pre-emphsis;Termination Resistors;Parallel Scrambler
    日期: 2004-06-23
    上传时间: 2009-09-22 11:54:00 (UTC+8)
    出版者: 國立中央大學圖書館
    摘要: 由於多媒體應用的增加,使得傳輸資料頻寬的需要量增大。如果把高速串列連結傳輸應用在價格低廉的纜線上,將是非常節省成本的方法。本論文中,我們實現所提出之平行化打散器(Parallel Scrambler),以及完成高速串列連結之資料傳送器並且建構適應性終端電阻與信號預先增強器電路於其中,來實際應用在高速傳輸上。並且提出一平行化打散器之設計法則與架構,把串列化打散器轉換成任意之平行輸出以解決在速度上的限制,達到速度上之要求。而在電路設計上,提出一新型具互斥或運算(Exclusive OR)之正負緣觸發暫存器使得打散器可以操作在更高的工作頻率。經由量測,證明使用TSMC 0.18um 1P6M CMOS製程製作之平行化打散器,可以工作在40Gbps的速度。 接著說明此高速串列連結之資料傳送器架構。提出一適應性終端電阻與架構,可以針對不同纜線的特性阻抗自動地調整成和它一樣,讓輸出端對傳輸電纜75Ω~45Ω的特性阻抗值做到匹配的效果,使訊號不會因阻抗不匹配產生反射。此外,改進了調整預先增強器電流的架構,讓預先增強器可以操作的更容易。此完整的高速串列連結之資料傳送器可以應用在長度為1公尺至15公尺的纜線上,在5公尺纜線下傳輸速率可達8Gbps,整個電路以TSMC 0.18um 1P6M CMOS製程予以實現。 Due to the increasing requirement of multimedia applications, the demand for data transmission bandwidth is increased. It is very efficient to make the use of low cost coaxial cable for high-speed link transmitting.In this thesis, we will implement a parallel scrambler and a high-speed serial link transmitter with adaptive termination resistors and pre-emphasis. A very systematic parallel scrambler design methodology and architecture is proposed to overcome the limitation of serial scrambler. A new XOR-DET-C2MOS cell is proposed to speed up the operation speed of the parallel scrambler. Measurement results show that 40Gbps parallel scrambler with 16 outputs can be achieved by using 0.18um CMOS process. We also propose a digital approach of adaptive termination resistors and architecture in the transmitter. It can match the characteristic impedance of coaxial cable automatically from 75Ω~45Ω to reduce the reflection caused by the mismatch of impedance. Moreover, the architecture of pre-emphasis is improved to make the method of tuning pre-emphasis current more easy. The transmitter with pre-emphasis can handle coaxial cable length from 1-meter to 15-meter. The performance of transmitting data at 8Gbps over the 5-meter coaxial cable is achieved. The overall circuit is implemented in TSMC 0.18um 1P6M process.
    显示于类别:[電機工程研究所] 博碩士論文

    文件中的档案:

    档案 大小格式浏览次数


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明