中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/984
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 78818/78818 (100%)
造访人次 : 34945518      在线人数 : 450
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/984


    题名: 小波分析於梁構件損傷檢測之應用;Damgae detection of beam member by the wavelet analysis
    作者: 謝豪駿;Hao-chun Hsieh
    贡献者: 土木工程研究所
    关键词: 傳遞函數;損傷檢測;梁構件;系統識別;FRF;模態振形;小波變換;beam member;system identification;wavelet analysis;transfer function;FRF;damage identification
    日期: 2005-06-29
    上传时间: 2009-09-18 17:17:11 (UTC+8)
    出版者: 國立中央大學圖書館
    摘要: 小波變換是近年來發展起來的一種新的時頻分析方法。它具有多分辨率分析(Multiresolution Analysis)的特點,而且在時頻兩域都具有表徵信號局部特徵的能力,所以成為眾多領域的研究重點。傳統梁構件損傷檢測是利用損傷前與損傷後之模態振型向量來進行各種指標計算,如模態尺度因子(MSF;Modal Scale Factor)、坐標模態確認準則(COMAC;Coordinate Modal Assurance Criterion)、模態振型差法(Modal Shape Deflection Method)與模態振型曲率變化法(Method of Modal Shape Curvature Change)等…。但在實際的工程應用中較難取得損傷前的模態振型向量,因此本論文結合了小波變換具有表徵信號局部特徵的優點和古典結構模態參數辨識方法-分量分析法,對梁結構損傷後之模態振型向量進行小波係數奇異性檢測,並進行室內實驗,對此新的損傷定位方法進行討論。 Wavelet analysis is a new time-frequency analytic technique which is developed in recent years. It becomes a key area of many researching due to its “Multiresolution Analysis” and its capability to reveal characters of partial signals in both time and frequency domain. In traditional beam member damage location identification, mode shapes of before and after damaged are used to calculate indices such as MSF(Modal Scale Factor), COMAC(Coordinate Modal Assurance Criterion), Modal Shape Deflection Method, MMC(Method of Modal Shape Curvature Change) etc.. But in real circumstance, it is difficult to obtain the mode shapes before damaged. Therefore this discourse presents a new damage location identification method, which combines both classical system identification method–Component Analysis and wavelet analysis. In this new method, the mode shapes of damaged structures are obtained by Component Analysis. Then the mode shapes are analyzed by wavelet transformation to get the positions of the damages by showing a peak in the distributions of the wavelet coefficients. We conduct lab experiment to recognize and discuss this new damage location identification method in this discourse.
    显示于类别:[土木工程研究所] 博碩士論文

    文件中的档案:

    档案 大小格式浏览次数


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明