參考文獻 |
[1] A. Amerasekera and C. Duvvury, ESD in Silicon Integrated Circuits, 2nd Edition, John Wiley & Sons, 2002.
[2] Electrostatic discharge (ESD) sensitivity testing – human body model (HBM), International Standard, JEDEC EIA / JESD22- A144-B, 2000.
[3] Maoyou Sun; Yicheng Lu,“A new ESD protection structure for high-speed GaAs RF ICs” in Electron Device Letters, IEEE, Volume 26, Issue 3, March 2005 Page(s):133 - 135.
[4] D. Ragle, K. Decker, and M. Loy, “ESD effects on GaAs MESFET lifetime,”in Proc. Int. Reliability Physics Symp., Mar. 1993, pp. 352–356.
[5] K. Van der Zanden, D. M. M.-P. Schreurs, R. Menozzi, and M. Borgarino, “Reliability testing of InP HEMTs using electrical stress methods,” IEEE Trans. Electron Devices, vol. 46, no. 8, pp. 1570–1576,Aug. 1999.
[6] K. Kiziloglu, S. Thomas III, F. Williams, Jr., and B. M. Paine, “Reliability and failure criteria for AlInAs/GaInAs/InP HBTs,” in Proc. Indium Phosphide Related Materials Conf., May 2000, pp. 294–297.
[7] D. M. Pozar, Microwave Engineering, Addison-Wesley, 1990.
[8] E. Alekseev, D. Pavlidis, “77 GHz high-Isolation coplanar transmit-receive switch using InGaAs/InP PIN diodes,” in 1998 Gallium Arsenide Integrated Circuit (GaAs IC) symposium, pp. 177 -180.
[9] M. J. Schindler and A. Morris, “DC-40 GHz and 20-40 GHz MMIC SPDT switches,” IEEE Trans. on Microwave Theory and Tech, vol NTT-35, on. 12, pp. 1486.1493, Dec. 1987.
[10] A. Gopinath,J.B.Rankin,“GaAs FET RF switches,”IEEE Trans. On Electron Devices,vol.ED-32,NO.7,pp.1272-1278,July 1985.
[11] ESD Protection in CMOS ICs (Prof. M-D Ker):http://www.ics.ee.nctu.edu.tw/~mdker/ESD/.
[12] A. Amerasekera , C. Duvvury ,“ ESD in Silicon Integrated Circuit”,Texas Instruments Inc., Wiley, 1995.
[13] ANSI/ESD S20.20-1999 standard
[14] DEPARTMENT OF DEFENSE- TEST METHOD STANDARD-MICROCIRCUITS-MIL-STD-883F.pdf
[15] G. Chen, H. Feng, H. Xie, R. Zhan, Q. Wu, X.Guan, A. Wang, K. Takasuka, S. Tamura, Z.Wang, and C. Zhang, “RF characterization of ESD protection structures,” in Dig. of papers on IEEE RFIC Symp., 2004, pp. 379-382.
[16] Ming-Dou Ker; Bing-Jye Kuo; “Decreasing-size distributed ESD protection scheme for broad-band RF circuits” Microwave Theory and Techniques, IEEE Transactions onVolume 53, Issue 2, Feb 2005 Page(s):582 - 589
[17] Ma, Y.; Li, G.P.; “ESD protection design considerations for InGaP/GaAs HBT RF power amplifiers” in Microwave Theory and Techniques, IEEE Transactions on, Volume 53, Issue 1, Jan. 2005 Page(s):221 – 228
[18] A. Amerasekera and C. Duvvury, ESD in Silicon Integrated Circuits, 2nd Edition, New York: Wiley, 2002.
[19] ESD Test Standard, ESD Association, ESD STM5.1, 1998.
[20] C. Jiang, E. Nowak, and M. Manley, “Process and design for ESD robustness in deep submicron CMOS technology,” in Proc. IEEE Int. Reliability Physics Symp., 1996, pp. 233–236.
[21] Frank P. Incropera, David P. DeWitt “Fundamentals of Heat and Mass Transfer,” Forth Edition, John Wiley & Sons, Inc. 1996.
[22] J. P. Holman, “ Heat Transfer,” International Student Edition, McGraw-Hill Book Co., Singapore(1986).
[23] F. P. Incropera and D. P. DeWitt, Introduction to Heat Transfer, 2nd edition, John Wiley & Sons, New York, 1990.
[24] ANSYS, ANSYS 9.0 HTML Online Documentation. Coupled-Field Analysis Guide, SAS IP Inc., USA, 2005.
[25] ANSYS, ANSYS 9.0 HTML Online Documentation. Theory Reference, SAS IP, Inc., USA, 2005.
[26] ANSYS, Inc., “Thermal-Electric Element,” Theory Reference 9.0, 2005.
[27] http://www.matweb.com/index.asp?ckck=1
[28] Kai Chang, Inder Bahl, Vijay Nair, “RF and Microwave Circuit and Component Design for Wireless Systems,” Chapter 7
[29] Gu, Z.; Johnson, D.; Belletete, S.; Fryklund, D.;“Low insertion loss and high linearity PHEMT SPDT and SP3T switch ICs for WLAN 802.11 a/b/g applications" in Radio Frequency Integrated Circuits (RFIC) Symposium, 2004. Digest of Papers. 2004 IEEE, 6-8 June 2004 Page(s):505 - 508
[30] M.-D. Ker, T.-Y. Chen, and C.-Y. Chang, “ESD protection design for CMOS RF integrated circuits,” in Proc. of EOS/ESD Symp., 2001, pp. 346-354.
[31] M.-D. Ker and C.-Y. Chang, “ESD protection design for CMOS RF integrated circuits using polysilicon diodes,” Microelectronics Reliability, vol. 42, pp. 863-872, 2002.
[32] G. Chen, H. Feng, H. Xie, R. Zhan, Q. Wu, X. Guan, A. Wang, K. Takasuka, S. Tamura, Z. Wang, and C. Zhang “Characterizing diodes for RF ESD protection”, IEEE Electron Device Letters, vol. 25 , pp. 323-325, May 2004.
[33] M. I. Natarajan, D. Linten, S. Thijs, Ph. Jansen, D. Trémouilles, W. Jeamsaksiri, T. Nakaie, M. Sawada, T. Hasebe, S. Decoutere, G. Groeseneken, “RFCMOS ESD protection and reliability,” in Proc. of IPFA, June, 2005, pp. 59-66.
[34] http://www.rfmd.com |