參考文獻 |
[1] N. H. Kutkut and K.W. Klontz, “Design Considerations for Power Converters Supplying the SAE J-1773 Electric Vehicle Inductive Coupler,” in Proc. IEEE APEC, vol. 2, pp. 841-847, Feb. 1997.
[2] H. J. Jiang and G. Maggetto, “Assessment of the Impact of Transformer Coupling Quality on Steady State Characteristics of Series Resonant Converters,” in Proc. IEEE PESC, vol. 2, pp. 1186-1191, June 1997.
[3] A. Ghahary and B. H. Cho, “Design of a Transcutaneous Energy Transmission System Using a Series Resonant Converter,” in Proc. IEEE PESC, pp. 1-8, June 1990.
[4] J. G. Hayes, J. T. Hall, M. C. Egan and J. M. D. Murphy, “Full-Bridge, Series-Resonant Converter Supplying the SAE J-1773 Electric Vehicle Inductive Charging Interface,” in Proc. IEEE PESC, vol. 2, pp. 1913-1918, June 1996.
[5] J. G. Hayes and M. G. Egan, “A Comparative Study of Phase-Shift Frequency and Hybrid Control of the Series Resonant Converter Supplying the Electric Vehicle Inductive Charging Interface,” in Proc. IEEE APEC, vol. 1, pp. 450-457, March 1999.
[6] G. Hua, E. X. Yang, Y. Jiang and F. C. Lee, “Novel Zero- Current- Transition PWM Converters,” IEEE Trans. Power Electron., vol. 9, pp. 601-606, Nov. 1994.
[7] J. Hirai, T. W. Kim and A. Kawamura, “Wireless Transmission of Power and Information and Information for Cableless Linear Motor Drive,” IEEE Trans. Power Electron., vol. 15, pp. 21-27, Jan. 2000.
[8] Y. Hiraga, J. Hirai, A. Kawamura, K. Ishioka, Y. Kaku and Y. Nitta, “Decentralized Control of Machines with the Use of Inductive Transmission of Power and Signal,” in Proc. IEEE-IAS Annu.l Meeting, vol. 2, pp. 875-881, Oct. 1994.
[9] J. Hirai, T. W. Kim and A. Kawamura, “Study on Crosstalk in Inductive Transmission of Power and Information,” IEEE Trans. Ind. Electron., vol. 46, pp. 1174-1182, Dec. 1999.
[10] J. Hirai, T. W. Kim and A. Kawamura, “Study on Intelligent Battery Charging Using Inductive Transmission of Power and Information,” IEEE Trans. Power Electron., vol. 15, pp. 335-345, March 2000.
[11] T. Bieler, M. Perottet, V. Nguyen and Y. Perriard, “Cotactless Power and Information Transmission,” IEEE Trans. Ind. Appl., vol. 38, pp. 1226-1272, Oct. 2002.
[12] Limits for Harmonic Current Emissions(Equipment Input Current <16A Per Phase), IEC/EN61000-3-2, 1995.
[13] B. Wilkenson, “Power factor correction and IEC 555-2,” Power Techniques Magazine, pp. 20-24, 1991.
[14] Y. Suzuki, T. Teshima, I. Sugawara and A. Takeuchi, “Experimental studies on active and passive PFC circuits,” in Proc. IEEE TELEC, pp. 571-578, 1997.
[15] O. Garcia, J. A. Cobos, R. Prieto, P. Alou and J. Uceda, “Single phase power factor correction: A survey,” IEEE Trans. Power Electron., vol. 18, no. 3, pp. 749-755, 2003.
[16] M. G. Egan, D. L. O’Sullivan, J. G. Hayes M. J. Willers and C. P. Henze, “Power Factor Corrected Single-Stage Inductive Charger for Electric Vehicle Batteries,” IEEE Trans. Ind.l Electron., vol. 54, no. 2, pp. 1217-1226, April 2007.
[17] T. Bieler, M. Perottet, V. Nguyen and Y. Perriard, “Contactless Power and Information Transmission,” IEEE Trans. Ind. Appl., vol. 38, pp. 1226-1272, Oct. 2002.
[18] H. Sakamoto and K. Harada, “A novel circuit for non-contact harging through electro-magnetic coupling,” in Proc. IEEE PESC, pp. 168-174, June. 1992.
[19] Y. Jang and M. M. Jovanovic, “A Contactless Electrical Energy Transmission System for Protable-Telephone Battery Chargers,” IEEE Trans. Ind. Electron., vol. 50, pp. 520-527, June 2003.
[20] R. Laouamer, M. Brunello and J. P. Ferrieux, “A Multi-Resonant Converter for Non-Contact Charging with Electromagnetic Coupling,” in Proc. IEEE APEC, vol. 1, pp. 450-457, Nov. 1997.
[21] J. Hirai, T. W. Kim and A. Kawamura, “Study on Crosstalk in Inductive Transmission of Power and Information,” IEEE Trans. Ind. Electron., vol. 46, pp. 1174-1182, Dec. 1999.
[22] C. G. Kim, D. H. Seo, J S. You, J. H. Park and B. H. Cho, “Design of a Contactless Battery Charger for Cellular Phone,” IEEE Trans. Ind. Electron., vol. 48, no. 6, pp. 1238-1246, Dec. 2001
[23] H. Ayano, K. Yamamoto, N. Hino and I. Yamato, “Highly efficient contactless electrical energy transmission system,” IEEE Trans. Ind. Electron., pp. 1346-1369, Nov. 2002.
[24] 趙恆生,“感應充電器耦合電路設計研究”,私立中原大學電機所碩士論文,民國90年6月。
[25] G. B. Joung and B. H. Cho, “An Energy Transmission System for an Artificial Heart Using Leakage Inductance Compensation of Transcutaneous Transformer,” IEEE Trans. Power Electron., pp. 1013-1022, Nov. 1998.
[26] B. Choi, J. Nho, H. Cha, T. Ahn and S. Choi, “Design and Implementation of Low-Profile Contactless Battery Charger Using Planar Printed Circuit Board Windings as Energy Transfer Device,” IEEE Trans. Ind. Electron., vol. 51, no. 1, February 2004.
[27] S. Y. R. Hui and W. W. C. Ho, “A new generation of unversal con- tactless battery charging platform for portable consumer electronic equipment,” IEEE Trans. Power Electron., vol. 20, no. 3, May 2005.
[28] H. Abe, H. Sakamoto and K.Harada, “A Noncontact Charger Using a Resonant Converter with Parallel Capacitor of the Secondary Coil,” IEEE Trans. Ind. Appl., pp. 444-451 Vol. 36, No. 2, March/April 2000.
[29] H. Ayano, K. Yamamoto, N. Hino and I. Yamato, “Highly efficient contactless electrical energy transmission system,” in Proc. IECON 2002, pp. 1364-1369, Nov. 2002.
[30] Y. S. Kong, E. S. Kim, I. G. Hwang and H. K. Lee, “Highly-efficiency series-parallel resonant converter for the non-contact power supply,” in Proc. IEEE APECe, vol. 2, pp. 1496-1501, March 2005.
[31] 工研院/能資所“非接觸式供電技術探討”,電力電子月刊第三卷第三期,民國94年5月。
[32] T. F. Wu, J. C. Huang, S. Y. Tseng and Y. M. Chen. “A single-stage fast regulator with PFC based on an asymmetrical half-bridge topology,” IEEE Trans. Ind. Electron., vol. 52, no 1, pp. 139-150, 2005.
[33] L. Rossetto, G. Spiazzi and P. Tenti, “Control techniques for power factor correction converters,” in Proc. EPE International Power Electronics and Motion Control Conference, pp. 1310-1318, 1994.
[34] S. Wall and R. Jackson, “Fast controller design for single-phase power-factor correction systems,” IEEE Trans. Ind. Electron., vol. 44, no. 5, pp. 654-660, 1997.
[35] Z. Yang and P. C. Sen, “Power factor correction circuit with robust current control technique,” IEEE Trans. Aerospace and Electronic Systems, vol. 38, no. 4, pp. 1210-1219, 2002.
[36] M. Orabi and T. Ninomiya, “A unified design of single-stage and two-stage PFC converter,” in Proc. IEEE PESC, pp. 1720-1725, 2003.
[37] M. M. Jovanovic and Y. Jang, “State-of-the-art, single-phase, active power-factor-correction techniques for high-power appliccations-an overview,” IEEE Trans. Ind. Electron., vol. 52, no. 3, pp. 701-708, 2005.
[38] J. S. Lai and D. Chen, “Design consideration for power factor correction boost converter operating at the boundary of continuous conduction mode and discontinuous conduction mode,” in Proc. IEEE APEC, pp. 267-273, 1993.
[39] T. F. Wu and T. H. Yu, “Off-line applications with single-stage converters,” IEEE Trans. Ind. Electron., vol. 44, no. 5, pp. 638-647, 1997.
[40] H. Wei and I. Bataresh, “Comparasion of basic converter topologies for power factor correction,” in Proc. IEEE PESC, pp. 1162-1172, 1998.
[41] F. J. F. Martin, C. B. Viejo, J. C. A. Anton, M. A. P. Garcia, M. Rico-Secades and J. M. Alonso, “Analysis and design of a high power factor, single-stage electronic ballast for high-intensity discharge lamps,” IEEE Trans. Power Electron., vol. 18, no. 2, pp. 558-569, 2003.
[42] H. J. Chiu and L. W. Lin, “A high-efficiency soft-switched AC/DC converter with current-doubler synchronous rectification,” IEEE Trans. Ind. Electron., vol. 52, no. 3, pp. 709-718, 2005.
[43] Y.S. Lee, L.P. Wong, and D.K.W. Cheng, “Simulation and Design of Integrayed Magnetics for Power Converters,” IEEE Trans. Magn., vol. 2, pp. 1008-1018, March 2003.
[44] 賴柏洲編著,“基本電學”,第二版,全華科技圖書。
[45] 羅志宏,“具負載與間距偵測之非接觸式供電系統”,國立中央大學電機所碩士論文,民國95年6月。
[46] 賴慶明,“單級高功因LLC諧振電源轉換器之研製”,國立中央大學電機所碩士論文,民國95年6月。 |