參考文獻 |
參考文獻
1. C. Y. Chang and S. M. Sze, ULSI Devices, Chapter 1, Wiley-Interscience, New York, 2000.
2. Hong Xiao, Introduction to Semiconductor Manufacturing Technology, Chapter 6, Prentice Hall, New Jersey, 2001.
3. 柯富祥、蔡輝嘉,"積體電路製程用光阻的發展現況",電子月刊,第五卷第一期,1999。
4. 陳學禮、施明昌、謝境峰,"利用多層底部抗反射層解決ArF微影技術之光阻受鹼性污染問題",毫微米通訊,第八卷第四期,38-43,2001。
5. D. A. Kinkead, W. Goodwin and K. Turnquest, "Modeling and Controlling the Effects of Base Contamination in DUV Lithography Resists", Micro, 71-84, October 2000.
6. D. Ruede, M. Ercken and T. Borgers, "The impact of Airborne Molecular Bases on DUV Photoresists", Solid State Tech., 63-70, August 2001.
7. 張俊彥,鄭晃忠,積體電路製程及設備技術手冊,初版,經濟部技術處發行,台北,1997。
8. W. Chen and H. Ahmed,.Appl.Phys. Lett. 62 (13), 1499 (1993).
9. M. Y. Wang, F. H. Ko, T. K. Wang, C. C. Yang and T. Y. Huang, "Characterization and Modeling of Out-diffusion of Manganese and Zinc Impurities from Deep Ultraviolet Photoresist", Journal of the Electrochemical , 146(9) 3455-3460 (1999)
10. C The International Technology Roadmap for Semiconductor (NTRS), Semiconductor Industry Association (SIA), Santa Clara, CA, 2001.
11. T. Terasawa, "Subwavelength Lithography (PSM, OPC)", IEEE Design Automation Conference, 295 -300 (2000)
12. R. M. von Bunau and H. Fukuda, "Printing Isolated Features with k1=0.2 Using Multiple-Pupil Exposure", Jpn. J. Appl. Phys. Vol. 40, 419-425 (2001)
13. M. D. Levenson, N. S. Viswanathan and R. A. Simpson, "Improving Resolution in Photolithography with a Phase-Shifting Mask", IEEE Trans. Electron Devices, Vol. ED-29, 1828-1836 (1982)
14. J. D. Plummer, M. Deal, P. B. Griffin, Silicon VLSI Technology: Fundamentals, Practice and Modeling, Chapter 5, Prentice Hall, New Jersey, 2000.
15. B. J. Lin, "Phase-Shifting Masks Gain in Edge", IEEE Circuits and Devices, Vol. 9, No.2, 28-35 (1993)
16. S. Nakao, A. Nakae, A. Yamaguchi, H. Kimura, Y. Ohno, Y. Matsui and M Hirayama, "0.12μm Hole Pattern Formation by KrF Lithography for Giga Bit DRAM", IEDM Tech. Dig., 61-64 (1996)
17. C. Romeo, P. Canestrari, A. Fiorino, M. Hasegawa, K. Saitoh and A. Suzuki, "IDEAL Double Exposure Method for Poly-level Structures", SPIE Vol. 4000, 240-250 (2000)
18. S. W. Lee, D. H. Chung, I. G. Shin, Y. H. Kim, S. W. Choi, W. S. Han and J. M. Sohn, "Doubly Exposed Patterning Using Mutually One-pitch Shifted Alternating Phase Shift Masks", SPIE Vol. 4346, 762-769 (2001)
19. H. Sewell, V. Bunze, N. Deluca and D. McCafferty, "An Evaluation of the Dual Exposure Technique", SPIE Vol. 4344, 323-333 (2001)
20. S. W. Lee, D. H. Chung, I. G. Shin, Y. H. Kim, S. W. Choi, W. S. Han and J. M. Sohn, "Doubly Exposed Patterning Using Mutually One-pitch Shifted Alternating Phase Shift Masks", SPIE Vol. 4346, 762-769 (2001)
21. 許兼貴,深紫外光光罩抗反射技術及次100奈米世代電子束直寫阻劑特性研究,國立清華大學碩士論文,2001。
22. P. J. Paniez, S. Gally, B. Mortini, C. Rosilio, P. O. Sassoulas, R. Dammel, M. Padmanaban, A. Klauck-Jacobs and J. Oberlander, "Thermal Phenomena in Acrylic 193 nm Resists", SPIE Vol. 3678, 1352-1363 (1999)
23. H. S. Chung, J. H. Jung, Y. S. Kim, K. S. Choi, N. H. You, S. W. Yoon and J. E. Park, "New Development of Cost-effective Sub-0.18μm Lithography with I-line", SPIE Vol. 3999, 499-504 (2000)
24. J. S. Kim, C. W. Koh, G. Lee, J. C. Jung and K. S. Shin, "Novel Routes toward Sub-70 nm Contact Windows by Using New KrF Photoresist", SPIE Vol. 4345, 232-240 (2001)
25. J. H. Chung, S. J. Choi, Y. Kang, S. G. Woo and J. T. Moon,"A Novel Resist Material for Sub-100 nm Contact Hole Pattern", SPIE Vol. 3999, 305-312 (2000).
26. H. L. Chen, C. K. Hsu, B. C. Chen, F. H. Ko, J. Y. Yang, T. Y. Huang and T. C. Chu,"Studies of Chemically Amplified Deep UV Resists for Electron Beam Lithography Applications", SPIE Vol. 4343, 781-788 (2001)
27. Y. Kang, S. G. Woo, S. J. Choi and J. T. Moon, "Development of Resist for Thermal Flow Process Application to Mass Production", SPIE Vol. 4345, 222-231 (2001)
28. J. S. Chun, H. E. Kim, S. Barnett and J. Shin, "Novel Harding Methods of DUV Chemically Amplified Photoresist by Ion Implantation and Its Application to New Organic ARC Material and Bilayer Process", SPIE Vol. 3678, 1364-1370 (1999)
29. Yoshio Nishi, Robert Doering andTim Wooldrige, Handbook of Semiconductor Manufacturing Technology, Marcel Dekker Inc, New York, 2000.
30. 龍文安 著,積體電路微影製程,初版,高立圖書有限公司,台北,1998。
31. Y. Nakayama, S. Okazaki and N. Saitou, "Electron-beam Cell Projection Lithography: A New High-throughput Electro-beam Diret-Writing Technology Using a Specially Tailored Si Aperture", J. Vac. Sci. Technol., 6(6), 1836-1840 (1990)
32. Y. Sakitani, H. Yoda, H. Todokoro, Y. Shibata, T. Yamazaki and K. Ohbitu, "Electron-beam Cell Projection Lithography", J. Vac. Sci. Technol., 10(6), 2759-2763 (1992)
33. 邱燦賓、施敏,"電子束微影技術",科學發展月刊,第28卷第6期,2000。
34. K. Suzuki, S. Matsui and Y. Ochiai, Sub-Half-Micron Lithography for ULSIs, Chapter 4,Cambridge University Press, Cambridge, 1999.
35. L. F. Thompson, C. G. Willson and M. J. Bowden, Introduction to Microlithography, Chapter 2, American Chemical Society, Washington, 1994.
36. 邱燦賓,"電子束微影技術之鄰近效應修正(I)",毫微米通訊,第七卷第三期,2000。
37. T. Yamauchi, T. Matsui, J. Kanamori, Y. Miyakawa, and K. Shimoyama, “0.2μm Hole Pattern Generation by Critical Dimension Biassing Using Resin Overcoat”, Jpn. J. Appl. Phys. Vol. 34, pp. 6615-6621 (1995).
38. T. Kanda, H. Tanaka, and Y. Kinoshita, “Advanced Microlithography Process with Chemical Shrink Technology”, Proc. SPIE 3999, p. 881-889 (2000).
39. J.-S. Chun, S. Bakshi, S. Barnett, J. Shih, and S. Lee, “Contact Hole Size Reducing Methods by using Water-Soluble Organic Over-coating material (WASOOM) as a barrier layer toward 0.15um contact hole; Resist flow technique I”, Proc. SPIE 3999, p. 620-626 (2000).
40. T. Toyoshima, T. Ishibashi, A. Minanide, K. Sugino, K. Katayama, T. Shoya, I. Arimoto, N. Yasuda, H. Adachi, and Y. Matsui, “0.1 pm Level contact hole pattern formation with KrF lithography be resolution enhancement lithography assisted by chemical shrink (RELACS)“, EDM 1998, pp. 333 - 336 (1998).
41. M. Sebald, J. Berthold, M. Beyer, R. Leuschner, C. Noelscher, U. Scheler, R. Sezi, H. Ahne, and S. Birkle, “Application aspects of the Si-CARL bilayer process”, Proc. SPlE 1466, pp. 227 – 236 (1991).
42. S. Hien, G. Czech, W.-D. Domke, H. Raske, M. Sebald, I. Stiebert, “Dual-wavelength photoresist for sub-200 nm lithography”, Proc. SPlE 3333, pp. 154 - 164 (1998)
43. K. Aramaki, T. Hamada, D. K. Lee, H. Okazaki, N. Tsugama, and G. Pawlowski, “Techniques to Print Sub-0.2 μm Contact Holes”, Proc. SPlE 3999, pp. 738 – 749 (1991).
44. T. Ohmi, "Future Trends and Applications of Ultra-Clean Technology," Tech. Dig, IEDM, 49, 1989.
45. M. M. Heyns, "New Wet Cleaning Strategies for Obtaining Highly Reliable Thin Oxides," Mat. Res. Soc. Sym. Pro. 315, p.35, 1993.
46. J. W. Coburn and Harold F. Winters, “Plasma etching – A discussion of mechanisms”, J. Vac. Sci. Technol., Vol. 16, No. 2, Mar./Apr. 1979, p.391.
47. T. Ishii, H. Nozawa, and T. Tamamura, in Abstracts of Int. Conf. On Micro- and Nano- Engineering (Glasgow, UK 1996),p.21
48. T. Ishii, H. Nozawa,, and T. Tamamura, Appl. Phys. Lett. 70 (9),,1110 (1997)
49. A. N. Broers, in Proc. Of 1st Internat’l Conf. On Electron and Ion Beam Science and Technology, edited by R. Bakish (Wiley, New York, 1964), p.191
50. A. N Broers, W. W. Molzen, J. J. Cuomo, and N. D. Wittels, Appl. Phys. Lett. 29 (9), 596 (1997) |