參考文獻 |
[1] S.-F. Gong, A. Backström, M. Ågesjö, A. Serban, and M. Karlsson, “Integration of a 5-GHz radio front-end in PCB,” in Proc. High Density Microsystem Design and Packaging and Component Failure Analysis Conf., June 2006, pp. 146–148.
[2] J. I. Ryu, D. Kim, H. M. Cho, and J. C. Kim, “Implementation of WLAN front end module with a power amplifier,” in Proc. Asia–Pacific Microw. Conf., Dec. 2007, pp. 99–102.
[3] C. H. Lee, A. Sutono, S. Han, K. Lim, S. Pinel, E. M. Tentzeris, and J. Laskar, “A compact LTCC-based Ku-band transmitter module,” IEEE Trans. Adv. Packag., vol. 25, no. 3, pp. 374–384, Aug. 2002.
[4] D. Kim, D. H. Kim, J. I. Ryu,Y. Park, and J. C. Park, “A compact BT/WiFi dual-band dual-mode RF front-end module,” in Proc. Asia–Pacific Microw. Conf., Dec. 2011, pp. 110–113.
[5] J.-I. Ryu, S.-H. Park, J.-W Moon, D. Kim, J. C. Kim, and N. Kang, “Implementation of a front-end-module by embedding a RF switch IC and a power amplifier in printed-circuit-
board,” in Proc. 59th, Electron. Comp. Technol. Conf., San Diego, CA, May 2009, pp.
1920–1925.
[6] W.-T. Chen, C.-S. Chen, C.-H. Tsai, K.-C. Chin, and S.-J. Lai, “A mobile WiMAX RF front-end module with integrated passive components and novel material,” in Proc. Electron. Syst. Integr. Technol. Conf., Sep. 2008, pp. 181–186.
[7] W. T. Khan, S. Bhattacharya, C. Patterson, G. E. Ponchak, and J. Papapolymerou, “Low cost 60 GHz RF front end transceiver integrated on organic substrate,” in IEEE MTT-S Int. Microw. Symp. Dig., Baltimore, MD, June 2011, pp. 1–4.
[8] P.-H. Wu, S.-M. Wang, and M.-W. Lee, “Wi-Fi/WiMAX dual mode RF MMIC front-end module,” in IEEE Radio Frequency Integrated Circuits Symp. Dig.,Boston, MA, June 2009, pp. 289–292.
[9] S. E. Gunnarsson, C. Kärnfelt, H. Zirath, R. Kozhuharov, D. Kuylenstierna, A. Alping, and C. Fager, “Highly integrated 60 GHz transmitter and receiver MMICs in a GaAs pHEMT technology,” IEEE J. Solid-State Circuits, vol. 40, no. 11, pp. 2174–2186, Nov. 2005.
[10] A. Raghavan, D. Heo, M. Maeng, A. Sutono, K. Lim, and J. Laskar, “A 2.4 GHz high efficiency SiGe HBT power amplifier with high-Q LTCC harmonic suppression filter,” in IEEE MTT-S Int. Microw. Symp. Dig., Seattle, WA, Jun. 2002, pp. 1019–1022.
[11] H. Wang, C. Sideris, and A. Hajimiri, “A CMOS broadband power amplifier with a transformer-based high-order output matching network,” IEEE J. Solid-State Circuits, vol. 45, no. 12, pp. 2709–2722, Dec. 2010.
[12] K. Chen, X. Liu, W. J. Chappell, and D. Peroulis, “Co-design of power amplifier and narrowband filter using high-Q evanescent-mode cavity resonator as the output matching network,” in IEEE MTT-S Int. Microw. Symp. Dig., Baltimore, MD, June 2011, pp. 1–4.
[13] K. Chen, J. Lee, W. J. Chappell, and D. Peroulis, “Co-design of highly efficient power amplifier and high-Q output bandpass filter,” IEEE Trans. Microw. Theory Techn., vol. 61, no. 11, pp. 3940 – 3950, Nov. 2013.
[14] K. Chen and D. Peroulis, “Design of highly efficient broadband class-E power amplifier using synthesized low-pass matching networks,” IEEE Trans. Microw. Theory Tech., vol. 59, no. 12, pp. 3162–3173, Dec. 2011.
[15] Y. C. Li, K. C. Wu, and Q. Xue, “Power Amplifier Integrated With Bandpass Filter for Long Term Evolution Application,” IEEE Microwave Wireless Component Letter, vol. 23, no. 8, August 2013.
[16] 黃雅純, “帶通功率放大器設計,” 碩士論文, 國立中央大學, June 2012.
[17] Y. Tsukahara, H. Amasuga, S. Goto, T. Oku and T. Ishikawa, “60 GHz high isolation SPDT MMIC switches using shunt pHEMT resonator , ” IEEE MTT-S Int. Microwave Symp. Dig., pp. 1541-1544, Jun. 2008.
[18] D. Shaeffer and T. Lee, “A 1.5 V, 1.5 GHz CMOS low noise amplifier,” IEEE J. Solid-State Circuits, vol. 32, pp.745 - 759 , May 1997.
[19] S. M. Luo, S. H. Weng, Y. L. Ye, C. H. Lin, C. N. Chung and H. Y. Chang, “24-GHz MMIC development using 0.15-μm GaAs PHEMT process for automotive radar applications,” in Asia Pacific Microwave Conference Proceedings, pp. 1-4, Dec. 2008.
[20] S. C. Shin, M. D. Tsai, R. C. Liu, K. Y. Lin and H. Wang, “A 24-GHz 3.9-dB NF low-noise amplifier using 0.18 µm CMOS technology”, IEEE Microwave Wireless Component Letter, vol. 15, no. 7, pp. 448-450, July 2005.
[21] T. P. Wang, “A Low-voltage low-power K-band CMOS LNA using DC-current-path split technology,” IEEE Microw. Wireless Compon., vol. 20, no. 9, pp. 519-521, Sept. Very Large Scale Integration (VLSI) Systems, vol. 18, pp. 638-651 , Apr. 2010.
[22] T. K. Nguyen, S. G. Lee, “ A sub-mA, high-gain CMOS low-noise amplifier for 2.4 GHz applications,” Circuits and Systems, 2006. ISCAS 2006. Proceedings. 2006 IEEE International Symposium on May 2006.
[23] S. C. Shin, M. D. Tsai, R. C. Liu, K. Y. Lin and H. Wang, “A 24-GHz 3.9-dB NF low-noise amplifier using 0.18 µm CMOS technology”, IEEE Microwave Wireless Component Letter, vol. 15, no. 7, pp. 448-450, July 2005.
[24] T. P. Wang, “A Low-voltage low-power K-band CMOS LNA using DC-current-path split technology,” IEEE Microw. Wireless Compon., vol. 20, no. 9, pp. 519-521, Sept. Very Large Scale Integration (VLSI) Systems, vol. 18, pp. 638-651 , Apr. 2010.
[25] A. Axholt, W. Ahmad and H. Sjöland, “A 90nm CMOS UWB LNA,” IEEE Norchip, pp. 25-28. Nov. 2008.
[26] P. Pieters , K. Vaesen , W. Diels , G. Carchon , S. Brebels , W. D. Raedt , E. Beyne and R. P. Mertens “High-Q integrated spiral inductors for high performance wireless front-end systems,” in Proc. IEEE Radio Wireless Conf., pp.251-254, Sep. 2000.
[27] J.-L. Chen, S.-F. Chang, C.-C. Liu and H.-W. Kuo, “Design of a 20-to-40 GHz bandpass MMIC amplifier,” in IEEE MTT-S Int. Microw. Symp. Dig., pp. 1275–1278, Jun. 2003.
[28] A. Ismail and A. Abidi, “A 3-10-GHz low-noise amplifier with wideband LC-ladder matching network,” IEEE J. Solid-State Circuits, vol. 39, pp. 2269-2277,Dec. 2004.
[29] M. Yang, M. Ha, Y. Park and Y. Eo, “A 3–10 GHz CMOS low-noise amplifier using wire bond inductors,” Microwave and Optocal Technology Letters, vol.51, no. 2, pp. 414-416, Feb.2009.
[30] S. M. Rezaul Hasan,. “Analysis and design of a multistage CMOS band-pass low-noise preamplifier for ultrawideband RF receiver,” IEEE Transactions on Very Large Scale Integration (VLSI) Systems, vol. 18, pp. 638-651 , Apr. 2010.
[31] Edwin van der Heijden, H. Veenstra, D. Hartskeerl, M. Notten and D. v. Goor, “Low noise amplifier with integrated balun for 24GHz car radar,” in Proc.SiRF, pp. 78-81,Jan. 2008.
[32] Huang, G., Kim, S.-K. and Kim, B.-S., “A wideband LNA with active balun for DVB-T application,” IEEE Int. Symp. on Circuits and Systems, pp. 421–424, May 2009.
[33] Azevedo, F. , Fortes, F. , Rosario, M.J., “A 2.4GHz CMOS balun/LNA for IEEE 802.11b/g WLAN transceiver,” Design & Technology of Integrated Systems in Nanoscale Era, 2007. DTIS. International Conference on pp. 114–117, Sept. 2007.
[34] J. Li, R. Ma, L. Han, R. Yang, and Wenmei Zhang, “A Co-design Study of Low Noise Amplifier and Band-pass Filter,” Microwave and Millimeter Wave Technology (ICMMT), 2012 International Conference on pp. 1–3, May 2012.
[35] 鍾育軒, “微波帶通低雜訊放大器設計” 碩士論文, 國立中央大學, 2009.
[36] 王品傑, “以單刀雙擲帶通濾波器實現高整合度射頻前端收發系統,” 碩士論文, 國立中央大學, June 2010.
[37] 吳建鋒, “以多重耦合線實現新式多功能微波元件,” 碩士論文, 國立中央大學, June 2011.
[38] 夏維凡, “應用於射頻前端系統之高整合度主動式帶通濾波器設計,” 碩士論文, 國立中央大學, June 2012.
[39] L. K. Yeung, K.-L. Wu, Y. E. Wang, “Low-temperature cofired ceramic LC filters for RF applications,” IEEE Microw. Mag., vol 9, no. 5, pp.118–128, Oct. 2008.
[40] D. M. Pozar, Microwave Engineering, 3rd ed., John Wiley & Sons, Inc., 2005.
[41] R. E. Lehmann and D. D. Heston, “X-Band monolithic series feedback LNA,” IEEE Trans. Microwave Theory Tech., vol. 33, no. 12, pp. 1560-1566, Dec. 1985.
[42] C.-L. Tsai and Y.-S. Lin, “Analysis and design of new single-to-balanced multi-coupled line bandpass filters using low temperature co-fired ceramic technology,” IEEE Trans. Microwave Theory Tech., vol. 56, no. 12, pp. 2902-2912, Dec. 2008.
[43] Y.-S. Lin, J.-F. Wu, W.-F. Hsia, P.-C. Wang, Y.-H. Chung, “Design of electronically switchable single-to-balanced bandpass low-noise amplifier,” IET Microwaves, Antennas & Propagation,vol. 7,no. 7,pp.510-517, May 2013. |